If you have oil production waters that will be destined for the environment, what international standards should be followed in the event that you are reaching a river?
In drinking-water, the limit is 0.5 Bq / L (alpha) and 1 Bq / L ( beta) [1]
[1] World Health Organization. "Guidelines for drinking-water quality: Incorporating first addendum." (2017).
This document provides assessments and proposes recommendations on radiation exposure, radiation safety training, and environmental impacts related to TENORM in the oil and gas industry. http://klytec.com/Publications/E-42_Report_Review%20of%20TENORM.pdf
http://www.iaea.org/inis/collection/NCLCollectionStore/_Public/46/004/46004085.pdf
slide 17/25, water supply in brazil
The international standards would be more a kind of recommendations if you are going to spill the effluent into a river.
Here you can find some result in USA body water, maybe you can find something interesting:
https://pubs.usgs.gov/sir/2011/5135/pdf/sir2011-5135.pdf
This is what OSPAR Commission said about Discharges of Radionuclides from the Non-nuclear sources:
https://www.ospar.org/ospar-data/p00637_discharges_from_non_nuclear_sectors_2012.pdf
In Brazil it is not allowed to eliminate effluents with any radioactive substance.
The enterprise must store it until the activity is no longer measurable.
Therefore, enterprises must have initial waste deposits, and government is building intermediary and final wastes deposits.
Right now we only have initial deposits.
Hi,
normally, if you have liquid effluent, and you are authorized to relase it in environmental (like river, sea), you must measure the effective dose to the public derived by the release in river/sea scenario and verify that the effective dose is < 0.3 mSv/y for the public....but depending by your scenario.
You can use the RP-135 Effluent and dose control from European Union NORM industries: Assessment of current situation and proposal for a harmonised Community approach.
In different table and in the annex you can undesrtand how to calculate the dose in different scenario (small river, large river, small marine box ecc...) derived by the liquid effluent, dose criteria to obtain 0.3 mSv/y in different case of Liquid Discharges.
Everything is correct if you have only natural radionuclides in your effluent (in your case i suppose yes, Radium 226 and 228) and if you have the authorization to discharge thye effluent in environmental.
Please, see the table 44, 45, 46, 47 and 48.
Link: https://ec.europa.eu/energy/sites/ener/files/documents/135.pdf
Mattia
- Badges
- Science topic