I would like to produce a local alternative for my inner filling solution reference electrode.The manufacturer recommend kcl, nacl solution.
Hi Agunloye,
I guess you have a SCE or a Ag/Cl electrode. In those electrodes, the filler solution is typically water saturated with either NaCl or KCl salt. It does not matter really which one you pick as long as the solution is saturated.
Good luck
Thanks sincerely.I will brief you back next Monday when I have tried your advice.
I have attempted various methods, including homozygous gene disruption and CRISPR-Cas9, but have not achieved the desired results. It appears that the gene of interest is situated in a...
15 July 2024 3,977 1 View
Would an average spot welder suffice for welding tabs for pouch cell electrodes instead of an ultrasonic one? Why would an ultrasonic welder be better than a regular spot welder?
10 July 2024 8,763 0 View
The impact im looking for could be both positive and negative on the electric grid
18 June 2024 9,269 3 View
IT
09 June 2024 735 1 View
What are the major ethical issues to be considered while working on design and construction of electronics device in a research work.
03 June 2024 8,189 4 View
The impact of monetary policy and bank rate on the performance of deposit money banks in Nigeria
31 May 2024 7,587 1 View
The result from PlasmidFinder shows that the assembled genome harbored many plasmids. Consequently, I want to investigate whether the plasmids are encoded for ARGs. And determine if they are on...
08 May 2024 7,467 0 View
ls it possible to emerge the wi-fi and Li-fi in one device and regular them.
21 April 2024 9,292 0 View
The code needs to be able to work on a 28-bus system having cost as the objective function and constrain like transmission loss.
18 April 2024 3,349 1 View
I want to understand why most analyses conducted in Africa use GMM instead of other panel data estimation techniques.
16 April 2024 5,322 3 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View
As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...
24 July 2024 6,930 1 View
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View
Hello everyone, A collaborator sent us his protocol in order to be able to use his immunohistochemistry kits. But one step contains PBS + 0.3% H2O2 + 0.1% sodium azide. Knowing the dangerousness...
23 July 2024 6,314 3 View
I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?
23 July 2024 5,776 2 View