URBANopt is close to what you're looking for. Have a look at the following links, also, consider contacting the developers:

https://www.nrel.gov/buildings/urbanopt.html

https://www.energy.gov/eere/buildings/urbanopt#:~:targetText=URBANopt%20(Urban%20Renewable%20Building%20And,scale%20thermal%20and%20electrical%20analysis.

This paper isn't very new but it's very relevant to your question:

- A review of modelling approaches and tools for the simulation of district-scale energy systems

https://www.sciencedirect.com/science/article/pii/S1364032115007704

Hope it helps.

Best,

A.

I recommand you the Grasshopper on Rhino, it is a new vision of programming to simply,

and you can find very useful plugins which can help you as the:

- grasshopper ladybug

- grasshopper butterfly

- grasshopper honeybee

and grasshopper dragonfly

every plug have many application about environmental architecture and urban design

There isn’t detailed building energy modeling software which can also simulate energy exchange and storage among buildings and grids all together. But Grasshopper should give you an idea.

Modelica is a modeling language for describing engineering or other kinds of models based on differential-algebraic equation systems. As such, it can be used to simulate building energy performance of single buildings as well as energy exchange and storage among buildings and grids in detail. However, creating these models isn't easy, and a suitable simulation environment is needed.

Open source libraries for this purpose are the Modelica Buildings Library, AixLib, and IDEAS:

https://simulationresearch.lbl.gov/modelica/

https://github.com/RWTH-EBC/AixLib

https://github.com/open-ideas/IDEAS

Modelica simulation environments or platforms:

• Dymola (commercial)
• JModelica.org (commercial, older open source versions accessible upon request)
• OpenModelica (open source)