What are the governing equations for "Impact Classifier Mill" in Powder Coating Industry?

In Powder Coating Industry, Is there any equation that relates physical properties of chips (granules of thermosetting polymer, i.e, extrudate that has been cooled and crushed) such as dimensions...

26 January 2021 1,077 3 View

What is the relative standard curve method?

The relative standard curve method in qPCR is a standard curve-based method for relative real time PCR data processing. Can anyone explain the calculations of this method to me? I read something...

20 July 2019 5,799 3 View

Please Help Me, What is the wrong with me in coding GA on Matlab to give me ''Too many input arguments'' Error?

I don't know why this message appear when I try to run this codes to solve the non-linear problem which includes 3 variables and 4 inequality constraints by Genetic Algorithm. Anyone can help me...

18 November 2018 8,830 2 View

Any reseacher that detect Plasmodium vivax on mosquitoes using gene encoding for circumsporozoite protein (CSP) by PCR or any available article?

I used PCR for detection of P. vivax CSP, multiple size bands were detected. i found many researches about the detection but mostly using ELISA , what am questioning about is the detection of size...

24 May 2018 253 1 View

Rna extraction from breast cancer explants?

23 September 2016 5,889 3 View

Does anyone have any experience with dendritic cell differentiation using the 2 day protocol?

Whats the difference in yield? Are the number of dendritic cells acquired comparable to the 6 day protocol? (immature dendritic cells)

26 May 2016 2,322 0 View

Any advice on MaxEnt Classifier and the reordering of features?

Currently, I am training a MaxEnt model (LibLinear Logistic Regression Trainer) to identify named entities. I figured out that when I change the order of the features inside the code the results...

28 November 2013 8,415 1 View

Hello, Does anyone know a similar program to winRhizo

01 January 1970 10,006 4 View

Is there any tutorial for comsol general projections?

Hi, im trying to make a projection in a 3d comsol model. I have a non uniforme chanel and my intention is to get the average tempreture in the y-z cross section and se the average tempreture...

02 March 2021 4,624 4 View

How to code open-ended questions in SPSS?

Hello all, In SPSS I am going to code 2 open-ended questions. I have already read all the answers and I made a list of the most important categories to which I can code the answers. This question...

02 March 2021 1,757 4 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Is it possible to do piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch?

How to do Piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch? Piezoelectric coupling between the rectangular substrate and rectangular...

02 March 2021 9,833 3 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View