What are the procedures involved in modelling pyrolysis reactor or chemical reactor using Autodesk invetor?
Dear Olusegun,
I suggest to see links and attached file in topic.
-Process Simulation Development of Fast Pyrolysis of Wood Using ...
https://pubs.acs.org/doi/abs/10.1021/ef502023y
-modelling and experimental investigation of waste tyre pyrolysis ...
https://yadda.icm.edu.pl/.../Modelling_and_experimental_investiga...
-Mathematical modeling of municipal solid waste plasma ... - DiVA Portal
https://www.diva-portal.org/smash/get/diva2.../FULLTEXT01.pdf
-pyrolysis process optimisation to maximise limonene production from ...
https://scholar.sun.ac.za/bitstream/handle/10019.1/.../mkhize_pyrolysis_2018.pdf?...1...
Best regards
Dr. Olusegun, I am not quite sure of the procedures but I will research further. The link provided by Dr. Mohamed-Mourad Lafifi will be helpful too.
Regards, MO.
Dr. Okwu,
Thanks you very much for your recommendation.
You are most welcome sir.
@ Mohamed-Mourad Lafifi ,
The links suggested are gratefully received. However, the links listed below would not open.
modelling and experimental investigation of waste tyre pyrolysis ...
I would be grateful to hearing from you.Regards,
Olusegun
A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids
28 July 2024 4,984 1 View
The Graph below shows an example of an amplification curve that shows an overshoot in fluorescence. I am using SYBR Green, BST polymerase, and 6 LAMP primers in the mixture and amplifying at 65...
14 July 2024 1,483 0 View
I'm evaluating the reproductive performance of quails. I have the fertility, and hatchability percentages for six different sire groups and would like to determine the significant difference...
14 July 2024 2,200 5 View
Before entering a project, social license and consent from the community of the said area is very crucical as it determined whether the projects is accepted and viable to the community and...
14 July 2024 5,319 0 View
I have been trying to install PowerMarker on my Windows 10 PC but it is not working. One of the requirements for PowerMarker installation is MS NET Framework 1.1.4322 condition, however, Windows...
07 June 2024 1,553 1 View
In this presence age, AI is being used in many areas of human endeavour. Be that as it may, can human creativity, empathy, and complex problem-solving abilities be replaced with AI in any field?
04 June 2024 7,327 10 View
I am looking for for mentor in medicinal or organic chemistry to help guide me in my research and career development. I am also open to collaborating with researchers who share my interest. If...
26 May 2024 5,186 2 View
A researcher always have plainful, instead of joyful, experience when they reflecting of their action taken. I, as an autoethnographer, came across of this journey, and the result is...
19 May 2024 7,347 2 View
I cannot get the Raman spectrum for carbon based materials like graphene in Raman spectroscopy of 785 nm . What can be done for obtaining the proper Raman peaks for carbon based materials in 785...
15 May 2024 3,410 2 View
am working on a seminar topic
09 May 2024 9,788 0 View
I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?
11 August 2024 3,115 1 View
I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...
10 August 2024 4,005 2 View
Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...
09 August 2024 7,892 0 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 718 0 View
Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...
06 August 2024 9,986 2 View
Greetings When one is to perform Simulation or modelling of Pyrolysis of Biomass Waste materials using Aspen Plus software, and one has both the macromolecules breakdown (Cellulose, Lignin and...
06 August 2024 5,023 1 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 453 3 View
I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...
05 August 2024 3,665 0 View
I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...
03 August 2024 6,028 4 View