are there any technology available to recover the water from the mist air or evaporated water mixed air?
Dear Janak,
The following two publications shed light on this technology:
1-How to get fresh water out of thin air
Fog-harvesting system developed by MIT and Chilean researchers could provide potable water for the world’s driest regions.
David L. Chandler, MIT News Office
August 30, 2013
http://news.mit.edu/2013/how-to-get-fresh-water-out-of-thin-air-0830
2- This Tower Pulls Drinking Water Out of Thin Air
Designer Arturo Vittori says his invention can provide remote villages with more than 25 gallons of clean drinking water per day
By Tuan C. Nguyen
smithsonian.com
April 8, 2014
http://www.smithsonianmag.com/innovation/this-tower-pulls-drinking-water-out-of-thin-air-180950399/?no-ist
Hoping this will be helpful,
Rafik
I am looking for a guidelines on the vegetable plant which bears highest oil yield.
08 September 2019 1,233 4 View
I have not come across any paper where it is systematically stated about how to calculate life cycle impact of a product manufactured using any process. if any one has idea or paper, kindly let me...
07 August 2016 1,285 5 View
06 July 2016 7,664 3 View
are there any criterions laid down by government of india or by any regulatory body worldwide for te safe disposal of waste water from vegetable dehydration industry? which are he technologies...
06 July 2016 9,223 8 View
It has been observed that students are interested in matters other than studying engineering. they are preparing for either GATE, GRE. TOFEL, GCET, CAT, UPSC or state level competivie exams.
04 May 2016 2,766 0 View
04 May 2016 4,365 1 View
Students have turned to refer local publishers books as test books.
04 May 2016 5,636 1 View
are there any process to be applied on the oils? or if at all we can't prevent it, then what are the methods available to remove the thickened mass from the remaining oil and reuse the left over oil?
01 February 2016 7,128 1 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
As the organizations getting prepared for the fourth industrial revolution, to enhance the skills of their workforce what type of changes are necessary and going to occur in the training and...
01 March 2021 3,199 3 View
I am currently doing my third year design project. I have been assigned to design a glycerol recovery column in vinyl acetate monomer production. The process unit before the recovery column is an...
01 March 2021 9,525 4 View
I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...
01 March 2021 3,703 3 View
When explaining substitution models, the substitutions are expressed as Q matrix. Why is the sum of the elements in a row zero?
28 February 2021 3,864 3 View
The resultant solid was partitioned three times with 250 ml of petroleum ether (40-60/c) to remove any fatty material and evaporated to dryness.
28 February 2021 9,464 2 View
Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.
28 February 2021 3,640 3 View
I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...
27 February 2021 8,483 3 View
Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...
26 February 2021 4,026 5 View
Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...
25 February 2021 9,602 4 View