Please mention the most efficient way with easily available precursers.
The method is quite simple actually, start with melamine and dissolve in ethylene glycol, add HNO3 as polymerizing agent, filter and dry the product and then calcinate it in air at 400-500 C. you will get carbon nitride
Please refer to following papers for details
https://www.researchgate.net/publication/259392599_Multifunctional_g-C3N4_Nanofibers_A_Template-Free_Fabrication_and_Enhanced_Optical_Electrochemical_and_Photocatalyst_Properties?ev=prf_pub
https://www.researchgate.net/publication/277713221_One_Dimensional_Graphitic_Carbon_Nitrides_as_Effective_Metal-Free_Oxygen_Reduction_Catalysts?ev=prf_pub
Good Luck
Article Multifunctional g-C3N4 Nanofibers: A Template-Free Fabricati...
Article One Dimensional Graphitic Carbon Nitrides as Effective Metal...
I would suggest the same answer of Dr. Faheem K. Butt .
Best regards,
Mostafa
Hi everyone, Recently I have been conducting Dynamic Light scattering experiments in a micellar solution at 5 and gel at 37 degrees of Celsius with latex particles of diameter 190-500 nm. While...
01 August 2024 1,168 4 View
Hi there, My question is: What standard curves should be used while estimating Tot GSH and GSSG by kinetic method using GR enzyme mediated recyling with DTNB chromophore? Actually I am following...
01 August 2024 8,217 1 View
I'd like to know if anyone has got experience in intracerebroventricular (ICV) AAV inj. I am looking for a concomitant spread of the AAV including but not limited to the motor cortex and the...
12 July 2024 781 0 View
In research papers on beam steering antennas, while the radiation pattern for the beam scanning plane (such as the horizontal or vertical plane) is typically presented, details regarding the...
03 July 2024 8,321 0 View
If I want to increase the photocatalytic activity of a thin film sample what should be it's ideal surface morphology and parameters? All scientific answers related this are highly appreciated.
19 June 2024 6,744 0 View
>Error # 7202. Command name: GET STATA >Input dictionary read error. >Execution of this command stops. Cross Product Matrices are not supported
19 June 2024 5,423 0 View
If I want to improve the photocatalytic activity of Ni doped ZnO thin film then which would be the better deposition process for thin film Spin Coating or Dip Coating?
18 June 2024 7,678 2 View
If I want to enhance the photocatalytic activity of Ni doped ZnO thin film. For this what are the parameters I need to tune and how? Related this all scientific answers/explanations are highly...
16 June 2024 4,533 1 View
Also, I will appreciate whole curing mechanism of Novolak with Hexamine
14 June 2024 9,908 0 View
From the definition of cell line, they are indefinitely propagated/subcultured. However, in practice beyond a certain passage number, they are said to loose characteristic gene profile, for e.g....
10 June 2024 6,890 1 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...
03 August 2024 5,384 0 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,137 0 View
A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids
28 July 2024 4,985 1 View