What are the chances of getting used Taber abrader in India ?

More Muralishwara Kakunje's questions See All

Which method in Design of Experiments (DoE) is to be used to optimize multiple output responses ?

There are 3 input parameters with 3 levels. Output responses are say tensile strength, crystallinity index and thermal stability parameters. Can I apply fractional factorial designs to optimize...

14 May 2024 9,430 2 View

Where can I find JCPDS XRD data of natural fiber ?

Is there a single JCPDS card for natural fiber ? My understanding is that all natural fibers basically have the same constituents albeit they are in different concentration. Cellulose,...

27 March 2024 5,032 1 View

Do you know of any laboratory/research center where chemical composition of natural fibers are determined in India (South India preferably) ?

I know of a place in Tamil Nadu where for one sample cost is 5000. I am looking for a cheaper alternative.

21 March 2024 6,513 1 View

How to identify crystalline and amorphous phases and calculate percentage crystallinity from XRD plot ?

This is the XRD plot of natural fiber. Usually in almost all the papers, 2 peaks appear for natural fiber. One broader amorphous peak at lower diffraction angle and lower intensity and another...

12 March 2024 3,435 9 View

What are some Q1 journals to publish research work on natural fibers ?

Journal of natural fibers seems to have come down to Q2.

22 December 2023 4,755 1 View

What are the differences between porous silica and mesoporous silica ?

Both are different products in Sigma Aldrich or Merck company product catalogue. Both seem to have porous structure. Mesoporous is very costly. So, looks like material in demand. What exactly are...

13 December 2023 1,646 4 View

How to find chemical composition of natural fibers ?

I do know the name of analytical methods, but not the method in detail. Kurschner and Hoffer’s method for cellulose determination. Klason method to determine lignin. Wax content by conrad method....

26 October 2023 6,350 1 View

What is the process to convert short natural fibers into continuous strands ?

For example. Coir or coconut husk fibers are short. How can make a continuous fiber out of it. Idea is to prepare unidirectional continuous coir fiber polymer composite.

29 August 2023 3,174 2 View

Is it possible to lock selected rows in online excel sheet to specific email address (or users) ?

The intention is that data specific to a person should be entered/edited by only him/her. Others should not be able to edit or delete the data when online excel sheet is shared to everyone in an...

11 July 2023 1,682 1 View

Why superheated steam is not corrosive as wet steam or water particles ?

Aren't wet steam, dry steam and superheated steam are all H20 ? Then why is it that superheated steam has lesser chances of corroding metals ?

31 January 2023 7,073 4 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Basis set and input instruction to calculate HOMO and LUMO using Orca for Imidazolium based organic salts?

Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...

09 August 2024 5,444 7 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

Separation of organic acids-HPLC?

Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.

07 August 2024 8,782 3 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

Polymer wear calculation?

What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?

04 August 2024 1,078 1 View

How to convert g/kg Humic acid dose to kg/ha?

I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?

02 August 2024 7,186 6 View

How to improve peaks separation in HPLC?

Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...

30 July 2024 435 3 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View