What are suitable commercial carbon material that can be used as cdi electrodes and also kindly suggest a suitable current collector?

03 March 2022 0 8K Report

Can carbon felt be used as cdi electrode as such or any carbon material incorporation is required.

Badges
Science topic

Similar topics
Geoscience
Remote Sensing

More Volga Muthukumar's questions See All

What are the BS VI and Euro 6 emission norms for diesel engine in g/kwh not g/km?

I need BS VI and Euro 6 emission norms for diesel engine in g/kwh But it is available in g/km How to i get it in g/kwhr?

13 May 2024 4,680 2 View

What is the solution for vanadium enrichment in AOD convertor slag?

We are doing vanadium impurity removal in AOD process. We can achieve the vanadium oxidation in the liquid metal and mil scale is used a crust forming agent. However, we couldn't t able to remove...

07 March 2024 7,411 0 View

Is it any way separate vanadium from sulphuric acidic solution contains 10gpl V with 25 gpl of Al ?

We are leaching vanadium from iron slag using sulphuric acid at 0.5 pH. The leaching liquor contains 9-11 gpl of vanadium along with 20 to 25 gpl of aluminum leaching and 2 gpl iron. What is the...

15 February 2024 3,184 0 View

What is the impact of TiO2 present in the iron ore in DRI process?

we are facing pellet carking in the DRI pellet with >4% TiO2 in the raw material. \is there any solution to control the pellet cracking in the downstream process. |Thanks in advance

04 January 2024 5,360 8 View

How to interpret the results of my factor analysis or change them accordingly?

Hello, I have first cleaned the data by handling all missing values. 1. I have done factor analysis for four variables regarding environmental concern. 2. I used PCA and Varimax 3. I have got...

08 September 2023 9,467 3 View

How to calculate sample size for multi-arm (three arm) RCT?

21 April 2023 4,910 1 View

How to calculate the energy share in the hydrogen usage in the RCCI engine?

How to calculate the energy share in the hydrogen usage in the RCCI engine? How to calculate energy share?

10 March 2023 2,333 0 View

What is the different between HCCI, PCCI, RCCI and GDCI combustion?

What is the different between HCCI, PCCI, RCCI and GDCI combustion? in RCCI which type of LRF and HRF used?

24 February 2023 6,521 5 View

Gromacs isn't reading/accepting the index.ndx file?

Please see the snapshot below, while the index groups have been created and are non-empty groups, the gmx2020 installation isn't computing rg for the desired group.

23 January 2023 3,827 0 View

How to convert the IC engine exhaust gas emission measurement in ppm and % into g/kWh and g/Km?

How to convert the IC engine exhaust gas emission measurement in ppm (NOx, HC) and % (CO, smoke & CO2) into g/kWh and g/Km?

27 December 2022 4,074 2 View

Capacitive deionization experimental set-up?

Hi everyone. I currently am working on a project about "capacitive deionization" for water desalination and I need to design an experimental cell. However, most manuscripts do not have an...

29 January 2023 1,315 8 View

Is there any effect on the water flux through the membrane due to the applied potential during capacitive deionization?

16 June 2020 9,945 1 View

How can i measure the stability of the suspension electrodes based on activated carbon material?

Flow elctrode capacitive deionization, suspension electrodes, optimization of suspension electrodes, stability of suspension, desalination

06 January 2019 2,630 0 View

How can i measure the stability of the suspension electrodes based on activated carbon material?

Flow elctrode capacitive deionization, suspension electrodes, optimization of suspension electrodes, stability of suspension, desalination

31 December 2018 1,303 0 View

What is viable option using graphene for desalination of seawater to freshwater?

I am working on a social project for desalination of seawater to freshwater. My team has selected graphene oxide for the filtration material. The project should be feasible, cost-efficient and...

31 October 2018 4,483 3 View

Capacitive Deionization: Some basic questions?

Hello everyone, I am a new learner in the field of CDI. I read some review papers on CDI recently but still have some questions. Hope I can get some comments from you. (1) Why carbon anode: As I...

06 July 2018 8,367 0 View

What are the differences between electrodyalsis (ED) and capacitive deionization (CDI) I think the principle of desalination is the same, what else?

Why current research is heading to CDI although it is similar to EDI?

09 October 2017 1,050 3 View

Why is Capacitive Deionization at constant current preferable than at constant voltage?

Based on a journal that I read, CDI at constant voltage leads to having a shorter time in a given cycle when the system has reached its lowest effluent concentration. My question is, what's bad...

29 March 2017 1,809 1 View

Why is Capacitive Deionization at constant current preferable than at constant voltage?

Based on a journal that I read, CDI at constant voltage leads to having a shorter time in a given cycle when the system has reached its lowest effluent concentration. My question is, what's bad...

02 March 2017 9,449 1 View

How can i fabricate an electrodialysis module for separation of ions from salty water?

I want to fabricate an electrodialysis module for separation of ions from salty water for research propose (lab scale). Currently, I am looking for the manuals or sources that explain practical...

07 February 2017 2,684 7 View