How to calculate the energy share in the hydrogen usage in the RCCI engine?
How to calculate energy share?
I need BS VI and Euro 6 emission norms for diesel engine in g/kwh But it is available in g/km How to i get it in g/kwhr?
13 May 2024 4,680 2 View
We are doing vanadium impurity removal in AOD process. We can achieve the vanadium oxidation in the liquid metal and mil scale is used a crust forming agent. However, we couldn't t able to remove...
07 March 2024 7,411 0 View
We are leaching vanadium from iron slag using sulphuric acid at 0.5 pH. The leaching liquor contains 9-11 gpl of vanadium along with 20 to 25 gpl of aluminum leaching and 2 gpl iron. What is the...
15 February 2024 3,184 0 View
we are facing pellet carking in the DRI pellet with >4% TiO2 in the raw material. \is there any solution to control the pellet cracking in the downstream process. |Thanks in advance
04 January 2024 5,360 8 View
Hello, I have first cleaned the data by handling all missing values. 1. I have done factor analysis for four variables regarding environmental concern. 2. I used PCA and Varimax 3. I have got...
08 September 2023 9,467 3 View
How to calculate sample size for multi-arm (three arm) RCT?
21 April 2023 4,910 1 View
What is the different between HCCI, PCCI, RCCI and GDCI combustion? in RCCI which type of LRF and HRF used?
24 February 2023 6,520 5 View
Please see the snapshot below, while the index groups have been created and are non-empty groups, the gmx2020 installation isn't computing rg for the desired group.
23 January 2023 3,827 0 View
How to convert the IC engine exhaust gas emission measurement in ppm (NOx, HC) and % (CO, smoke & CO2) into g/kWh and g/Km?
27 December 2022 4,074 2 View
I have designed a 1x4 array antenna .i have got endfire radiation pattern .but I need a broadside pattern.
01 November 2022 6,062 3 View
Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...
04 August 2024 5,974 3 View
I heard an explanation about something being a better proton acceptor or lone pair donor but that doesn't make sense. I couldn't explain in in terms of acid-base theory. The hand-waving way I saw...
03 August 2024 9,918 0 View
I'm trying to calculate the tolerance factors of the hydride perovskite and the value calculated by me and the reported values are contradictory. Need more clarity in using the correct ionic radii...
01 August 2024 2,614 1 View
Hello Everyone! I am trying to create a metal hydride system where I am trying to create a temperature control with the emphasis on measuring the concentration of the hydrogen with the hydrogen...
29 July 2024 7,577 2 View
For people today, the enigma of the size of the proton still remains enigmatic. However, being myself a researcher in new physical theory which makes it possible to extend the different standard...
28 July 2024 7,823 1 View
In general, when performing a Tafel analysis for corrosion resistance measurements, a line voltage scan is performed from say -250 to +250 mV vs. OCV at low scan speed around 0.125 mV/s. However,...
25 July 2024 7,982 3 View
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View
I am new to research. The boiling point of triethyl amine (NEt3) is 89 degrees centigrade. I am skeptical that when I will let the hydrogen escape which is getting generated in situ, I will also...
21 July 2024 7,284 4 View
Let me say I have a solar plant in operation and I want to build up a wind power plant, and later make a hybrid so that I could power the electrolyser as load for green hydrogen production.
14 July 2024 9,547 4 View
I have collect a LSV data by taking SCE as the reference electrode. But I want to convert this one to Potential with respect to Reversible Hydrogen Electrode. Please suggest me the required...
13 July 2024 7,841 2 View