Why can't I observe XRD peaks of nanoclay in polymer matrix?

Dear All, I added different amounts of nanoclay (e.g. wt% 1,3,5) in my polymer matrix. I couldn't observe any peaks related with my filler especially for 1 and 3 wt%. I tried to change slits,...

11 December 2018 4,656 10 View

Is there a MEMS force sensor with nN resolution?

05 June 2016 7,634 2 View

Where can I find nanosized PP particles?

31 December 2015 5,638 7 View

Where can I find polypropylene microspheres?

I'm looking for polypropylene microspheres to use them in microfluidics. I will appreciate for any help.

09 October 2015 4,485 4 View

How can I determine concentration of solutions for electroless plating?

I want to coat my millimeter sized sample with electroless coating process. First of all I need to sensitize the surface with SnCl2 then activate it with PdCl2. I implemented all of the steps...

05 June 2015 7,581 6 View

How can I remove polypropylene from plasma bonded glass surface?

02 March 2015 2,440 3 View

How should I mold metallic bodies in micro scale?

31 December 2014 6,871 9 View

How can I disperse prussian blue in water ?

31 December 2014 5,772 3 View

How can I have a good adhesion between metal and polymer?

Is it possible to provide a strong bonding between metal and polymer interface via plasma process ? What are the possible conditions to have this ?

31 December 2014 7,182 17 View

No title

11 December 2014 769 1 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

Apart from Nanosilica and CNT's what are the other nanomaterials readily available to use in concrete mixture?

Nanotechnology in concrete materials

01 March 2021 3,379 3 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

Can impedance of antenna be less than 50 ohms?

I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...

27 February 2021 4,218 7 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

Resistivity of PVD TiNx thin films vs. N2 flow?

In the PVD of TiN thin films (~100A), I've found the resistivity of the TiN films dropped from ~100 to 60um*cm with N2 flow increasing up to the metallic mode ending point; then the resistivity...

21 February 2021 1,864 2 View

How to calculate refractive index (n and kvalue) against energy (in eV) data for alloyed nanomaterials through Independent Phase Approximation method?

Suggest me the method or some other software to calculate the above said data for nanoparticles.

21 February 2021 3,350 7 View

Why are the modelled and circuit system different in response for controlled buck converter?

[Images are attached at bottom] I am currently working on a buck converter controlled by two different control methods, Reinforcement learning applied to find PID values & a lead-lag...

16 February 2021 5,060 10 View