I want to increase degradation rate of my specimens, what type of coating material I can use? Or any other method..
I want to know which process has more forces and why?
05 February 2019 9,144 3 View
Generally, temperature rises during cutting and have adverse effects on adjacent neural tissues.
08 September 2018 786 0 View
Which resources are useful to learn soft computing techniques?
18 April 2018 8,752 3 View
03 April 2018 4,699 3 View
I want to optimize my results, which technique i should use? Genetic Algorithm Fuzzy logic Particle swarm optimization
01 February 2018 1,882 7 View
Bio manufacturing is a prominent field, what novel methods are used in this field?
01 February 2018 4,404 3 View
During the phase of grinding, i want to measure the temperature rise due to heat evolution during machining But in real-time.
01 February 2018 2,131 10 View
I want to decrease the temperature rise during grinding, confined space is a major constraint, Lubrication or Oil will not help, Please suggests any other methods or techniques?
31 December 2017 9,077 5 View
I want to use a software for writing research papers. Please suggest a software which can provide multiple journal formats and automatically modifies standard research paper as per the...
01 January 1970 7,857 65 View
01 January 1970 2,873 3 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,298 0 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
What is the most suitable experimental setting to understand the consequences of a particular gene: (1) targeted degradation of the specific transcription factor (TF) of the gene, followed by...
04 August 2024 6,265 1 View
I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...
30 July 2024 3,294 3 View
I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose
25 July 2024 438 3 View
Kindly share a research paper that explains the effect of Methanol and ethanol treatment on collagen based scaffolds. How it increases porosity and swelling. Kindly help me find a paper. Thank you
24 July 2024 3,937 0 View
I have been harvesting monocyte-derived macrophages from buffalo and cattle fresh whole blood using the same protocol for years and getting good macrophage cultures. Below is the protocol that I...
23 July 2024 4,074 2 View
I’m having difficulty achieving high RNA integrity in my samples. Although the 260/280 and 260/230 ratios are satisfactory after RNA extraction, the RNA samples show signs of degradation when...
22 July 2024 155 4 View
I want to extract glycosides from my mangrove leaf samples, but my laboratory lacks an incubator capable of reaching temperatures above 60°C. The paper I am following specifies a minimum...
13 July 2024 3,686 0 View