Simulate equivalent reinforced concrete in ABAQUS for simulating full scale RC structures?

06 June 2018 0 4K Report

Can concrete damage plasticity model in Abaqus simulate equivalent reinforced concrete by modifying its proprieties to account for the effect of steel bars (area and direction)?

Badges
Science topic

More Ibrahim M. Metwally's questions See All

How to accurately model Steel Fiber Concrete in ABAQUS?

How to accurately model Steel Fiber Concrete in ABAQUS? By other meaning, how to randomly distributed steel fibers inside concrete in ABAQUS?

11 December 2018 5,882 7 View

How to model the fragmentation of concrete due to dynamic loading in ABAQUS?

How to model the fragmentation of concrete due to dynamic loading as high velocity impact by projectile in ABAQUS?

05 June 2016 5,177 0 View

In abaqus, how to define the rate of loading on the concrete beam ?

If the concrete beam exposed to static loading in the lab at the rate of loading = .05 mm/sec., how to define this rate accurately in ABAQUS?

02 March 2016 4,416 5 View

How can I model the repaired concrete beams using epoxy injection in ABAQUS?

how to model the repaired concrete beams using epoxy injection in ABAQUS? firstly, the RC beam was loaded up to appear of first crack( 1mm width), at the middle part of the beam, this meet also...

10 November 2015 9,539 7 View

How to model and simulate a small part instead of all model in ABAQUS?

07 August 2015 3,968 0 View

How might I model the nonlinear bond slip between steel bars and surrounding concrete by ABAQUS?

How to model the nonlinear bond slip between steel bars and surrounding concrete by ABAQUS?

06 July 2015 3,592 4 View

How do I model the nonlinear bond slip between steel bars( Truss element ) and surrounding concrete (solid element)by ABAQUS?

How to model the nonlinear bond slip between steel bars( Truss element ) and surrounding concrete (solid element)by ABAQUS? How to model the nonlinear bond slip between steel bars( Truss element )...

06 July 2015 9,104 3 View

How to accurately model Steel Fiber Concrete in ABAQUS?

OPEN DISCUSSION:- How to accurately model Steel Fiber Concrete in ABAQUS? By other meaning, how to randomly distributed steel fibers inside concrete in ABAQUS?

01 January 1970 10,115 3 View

How to export data from Sap 2000 or Etabs software to ABAQUS?

Because of modeling of skyscrapers or towers by using Abaqus is very complicated. Contrary, modeling by Etabs, Sap2000, or Revit will be more easier. Exporting data from Etabs, Sap 2000 ,...

01 January 1970 6,559 2 View

How to get moment output in Abaqus Standart?

I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...

08 August 2024 4,831 4 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

Can anyone explain why there is not any color bands in the middle portion of the tensile coupon?

Details of the Analysis. Static Analysis Composite Layup Continuum Shell Elements FRP Material (Elastic and Hashin Damage)

03 August 2024 8,538 4 View

What are the limitations and challenges of using machine learning for predicting concrete compressive strength in practical applications?

Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...

03 August 2024 2,546 2 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

Simulation of metal drawing by Abaqus with UMAT?

Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...

30 July 2024 7,062 1 View

Why running a restart analysis in Abaqus in Ubuntu OS gives an error as attached when running the same job in Windows doesn't give any error and runs?

I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...

29 July 2024 9,572 3 View

How Can I Apply Hashin Damage Properties to Solid Elements in Abaqus Without Using VUMAT?

Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...

28 July 2024 8,169 0 View