Hello, Iam M. Chaithanya, pursuing Ph.D. My title is EFFECT OF TOOL GEOMETRY AND THERMAL ANALYSIS OF FRICTION STIR WELDING PROCESS. As part of my work first step is to select material on which friction stir welding to be done.i need to select base material on which work as not yet been done. In this regard can i have some information regarding the materials/alloys on which friction stir welding can be performed.
please go through article link this will be useful to you
Friction Stir Welding/Processing Tool Materials and Selection
Article Tool material effect on the friction stir butt welding of AA...
http://shodhganga.inflibnet.ac.in/bitstream/10603/8523/11/11_chapter%204.pdf
http://shodhganga.inflibnet.ac.in/bitstream/10603/8523/11/11_chapter%204.pdf
http://www.iosrjournals.org/iosr-jmce/papers/vol12-issue5/Version-1/D012513136.pdf
https://en.wikipedia.org/wiki/Dissimilar_friction_stir_welding
https://www.akgec.in/documents/journals/AKG_Int_Journal_Tech_Vol_6_no_1_4.pdf
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J.
Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties
(2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
Magalhães, V.M., Leitão, C., Rodrigues, D.M.
Friction stir welding industrialisation and research status
(2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M.
A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing
(2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
Wang, X., Pan, Y., Lados, D.A.
Friction Stir Welding of Dissimilar Al/Al and Al/Non-Al Alloys: A Review
Thakare, S.B., Kalyankar, V.D.
Friction stir welding of T joints of dissimilar aluminum alloy: A review
(2018) AIP Conference Proceedings, 1943, статья № 020058, .
Wanare, S.P., Kalyankar, V.D.
Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review
(2018) AIP Conference Proceedings, 1943, статья № 020048, .
Shah, L.H., Othman, N.H., Gerlich, A.
Review of research progress on aluminium–magnesium dissimilar friction stir welding
(2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
Parihar, R.S., Setti, S.G., Sahu, R.K.
Recent advances in the manufacturing processes of functionally graded materials: A review
(2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L.
Weldability of thermoplastic materials for friction stir welding- A state of art review and future applications
(2018) Composites Part B: Engineering, 137, pp. 1-15.
Gangwar, K., Ramulu, M.
Friction stir welding of titanium alloys: A review
(2018) Materials and Design, 141, pp. 230-255.
Rathee, S., Maheshwari, S., Siddiquee, A.N.
Issues and strategies in composite fabrication via friction stir processing: A review
(2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
Wu, C., Su, H., Shi, L.
Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction StirWelding
(2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N.
Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties
(2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J.
Friction stir welding/processing of polymers and polymer matrix composites
(2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
Haghshenas, M., Gerlich, A.P.
Joining of automotive sheet materials by friction-based welding methods: A review
(2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
Mohan, D.G., Gopi, S.
Induction assisted friction stir welding: a review
(2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
Zhang, H., Huang, Y., Guo, Y., Lu, Q.
Technological and Process Advances in Robotic Friction Stir Welding
(2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R.
Friction stir welding of Aluminium matrix composites - A Review
(2018) MATEC Web of Conferences, 144, статья № 03002, .
Padhy, G.K., Wu, C.S., Gao, S.
Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
(2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
Węglowski, M.S.
Friction stir processing – State of the art
(2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N.
Joining and fabrication of metal matrix composites by friction stir welding/processing
(2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L.
Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review
(2018) Procedia Manufacturing, 20, pp. 59-64.
Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M.
Production of Surface Composites by Friction Stir Processing-A Review
(2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
Mao, Y., Ke, L., Chen, Y., Liu, F.
Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates
(2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
Yajie, L., Fengming, Q., Cuirong, L., Zhisheng, W.
A review: Effect of friction stir welding on microstructure and mechanical properties of magnesium alloys
(2017) Metals, 7 (12), статья № 524, .
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhães, V.M., Leitão, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048, .
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium–magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002, .
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Węglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
23. Mao, Y., Ke, L., Chen, Y., Liu, F. Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates (2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
24. Yajie, L., Fengming, Q., Cuirong, L., Zhisheng, W. A review: Effect of friction stir welding on microstructure and mechanical properties of magnesium alloys (2017) Metals, 7 (12)
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhães, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium–magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002, .
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Węglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
23. Mao, Y., Ke, L., Chen, Y., Liu, F. Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates (2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
24. Yajie, L., Fengming, Q., Cuirong, L., Zhisheng, W. A review: Effect of friction stir welding on microstructure and mechanical properties of magnesium alloys (2017) Metals, 7 (12)
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhães, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium–magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002, .
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
23. Mao, Y., Ke, L., Chen, Y., Liu, F. Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates (2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
24. Yajie, L., Fengming, Q., Cuirong, L., Zhisheng, W. A review: Effect of friction stir welding on microstructure and mechanical properties of magnesium alloys (2017) Metals, 7 (12)
You should download and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhães, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium–magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
23. Mao, Y., Ke, L., Chen, Y., Liu, F. Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates (2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
24. Yajie, L., Fengming, Q., Cuirong, L., Zhisheng, W. A review: Effect of friction stir welding on microstructure and mechanical properties of magnesium alloys (2017) Metals, 7 (12)
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhães, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium–magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
23. Mao, Y., Ke, L., Chen, Y., Liu, F. Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates (2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
24. Yajie, L., Fengming, Q., Cuirong, L., Zhisheng, W. A review: Effect of friction stir welding on microstructure and mechanical properties of magnesium alloys (2017) Metals, 7 (12)
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium–magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
23. Mao, Y., Ke, L., Chen, Y., Liu, F. Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates (2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
24. Yajie, L., Fengming, Q., Cuirong, L., Zhisheng, W. A review: Effect of friction stir welding on microstructure and mechanical properties of magnesium alloys (2017) Metals, 7 (12)
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
23. Mao, Y., Ke, L., Chen, Y., Liu, F. Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates (2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
24. Yajie, L., Fengming, Q., Cuirong, L., Zhisheng, W. A review: Effect of friction stir welding on microstructure and mechanical properties of magnesium alloys (2017) Metals, 7 (12)
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
23. Mao, Y., Ke, L., Chen, Y., Liu, F. Plastic Flow Characteristic of Local Material in the Friction Stir Weld Seam of Aluminum Alloy Thick Plates (2017) Cailiao Daobao/Materials Review, 31 (12), pp. 145-149.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
22. Sudhakar, M., Srinivasa Rao, C.H., Saheb, K.M. Production of Surface Composites by Friction Stir Processing-A Review (2018) Materials Today: Proceedings, 5 (1), pp. 929-935.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
21. Kulkarni, B.S., Pankade, S.B., Andhale, S.R., Gogte, C.L. Effect of backing plate material diffusivity on microstructure, mechanical properties of friction stir welded joints: A Review (2018) Procedia Manufacturing, 20, pp. 59-64.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
20. Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., Han, H.N. Joining and fabrication of metal matrix composites by friction stir welding/processing (2018) International Journal of Precision Engineering and Manufacturing - Green Technology, 5 (1), pp. 151-172.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
19. Weglowski, M.S. Friction stir processing – State of the art (2018) Archives of Civil and Mechanical Engineering, 18 (1), pp. 114-129.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
18. Padhy, G.K., Wu, C.S., Gao, S. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review (2018) Journal of Materials Science and Technology, 34 (1), pp. 1-38.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
17. Subramanya, P., Amar, M., Arun, S., Mervin, H., Shrikantha, R. Friction stir welding of Aluminium matrix composites - A Review (2018) MATEC Web of Conferences, 144, 03002
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
16. Zhang, H., Huang, Y., Guo, Y., Lu, Q. Technological and Process Advances in Robotic Friction Stir Welding (2018) Cailiao Daobao/Materials Review, 32 (1), pp. 128-134.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
15. Mohan, D.G., Gopi, S. Induction assisted friction stir welding: a review (2018) Australian Journal of Mechanical Engineering, pp. 1-5. Article in Press.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
14. Haghshenas, M., Gerlich, A.P. Joining of automotive sheet materials by friction-based welding methods: A review (2018) Engineering Science and Technology, an International Journal, 21 (1), pp. 130-148.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
12. WAHID, M.A., KHAN, Z.A., SIDDIQUEE, A.N. Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties (2018) Transactions of Nonferrous Metals Society of China (English Edition), 28 (2), pp. 193-219.
13. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J. Friction stir welding/processing of polymers and polymer matrix composites (2018) Composites Part A: Applied Science and Manufacturing, 105, pp. 235-257.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
11. Wu, C., Su, H., Shi, L. Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding (2018) Jinshu Xuebao/Acta Metallurgica Sinica, 54 (2), pp. 265-277.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
9. Gangwar, K., Ramulu, M. Friction stir welding of titanium alloys: A review (2018) Materials and Design, 141, pp. 230-255.
10. Rathee, S., Maheshwari, S., Siddiquee, A.N. Issues and strategies in composite fabrication via friction stir processing: A review (2018) Materials and Manufacturing Processes, 33 (3), pp. 239-261.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
8. Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L. Weldability of thermoplastic materials for friction stir welding - A state of art review and future applications (2018) Composites Part B: Engineering, 137, pp. 1-15.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
7. Parihar, R.S., Setti, S.G., Sahu, R.K. Recent advances in the manufacturing processes of functionally graded materials: A review (2018) IEEE Journal of Selected Topics in Quantum Electronics, 25 (2), pp. 309-336.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
6. Shah, L.H., Othman, N.H., Gerlich, A. Review of research progress on aluminium-magnesium dissimilar friction stir welding (2018) Science and Technology of Welding and Joining, 23 (3), pp. 256-270.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
4. Thakare, S.B., Kalyankar, V.D. Friction stir welding of T joints of dissimilar aluminum alloy: A review (2018) AIP Conference Proceedings, 1943, 020058
5. Wanare, S.P., Kalyankar, V.D. Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review (2018) AIP Conference Proceedings, 1943, 020048
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
3. Rathee, S., Maheshwari, S., Siddiquee, A.N., Srivastava, M. A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 334-366.
You should download from http://sci-hub.tw (or any other sources) and read any recent reviews, such as:
1. Ma, Z.Y., Feng, A.H., Chen, D.L., Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties (2018) Critical Reviews in Solid State and Materials Sciences, 43 (4), pp. 269-333.
2. Magalhaes, V.M., Leitao, C., Rodrigues, D.M. Friction stir welding industrialisation and research status (2018) Science and Technology of Welding and Joining, 23 (5), pp. 400-409.
U can find good information here:
http://medcraveonline.com/MSEIJ/MSEIJ-02-00044.pdf
https://scholar.google.com/citations?user=xmeA9HoAAAAJ&hl=en
Development of Materials for Advance Ultra super critical application in power-plant is most critical. Material joining is more peculiar in that.The joining of SS304HCu and Inconel 617 found most important in it .Z phase and MX precipitates formation has been reviewed by arc welding .research has not been done in Friction stir welding aspect .Hope it gives you an idea .Let me know for further
Hi congratulations for your research. FSW work well mostly on soft metals and it's alloys. Mostly people select aluminum and copper for this. I did my PhD work on 'FSW on Steel'. This welding was achieved by adopting an additional heating source for in situ heating. If you are interested you can find papers on my profile.
please go through article link this will be useful to you
Friction Stir Welding/Processing Tool Materials and Selection
Article Tool material effect on the friction stir butt welding of AA...
http://shodhganga.inflibnet.ac.in/bitstream/10603/8523/11/11_chapter%204.pdf
http://shodhganga.inflibnet.ac.in/bitstream/10603/8523/11/11_chapter%204.pdf
http://www.iosrjournals.org/iosr-jmce/papers/vol12-issue5/Version-1/D012513136.pdf
https://en.wikipedia.org/wiki/Dissimilar_friction_stir_welding
https://www.akgec.in/documents/journals/AKG_Int_Journal_Tech_Vol_6_no_1_4.pdf
Check the following reference Please.. it might's assist you in your question … Regards…
http://www.bil-ibs.be/sites/default/files/FSWAcier/fsw.pdf
How to remove the stick work piece material (aluminium) over tool material (H13 Steel), any chemical solution recommended for this problem...?
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Materials Science
- Materials
- Inorganic Materials
- Metals
- Alloys