Who has the technical information about oil production? Can anyone help with the properties of oils? Oil with high surface tension
what kind of information do u need?
Amirhossein Aghabarari
Properties such as Dynamic viscosity & surface tension & Density...
the mentioned properties depend on different factors such as pressure and temperature
you can find properties for different type of oil in the following article(table 2, fluid typeIII)
"Scaling equation for counter current imbibition in the presence of
gravity forces considering initial water saturation and SCAL properties"
Thank you for your guide.
you're welcome
Hi everybody, I am doing CHIP experiment. The problem is that in my gel agarose I see alot of DNA with big size (longer that 1000 bp) which means there is alot of unfragmented DNA in my gel. I...
06 September 2020 1,507 5 View
Hello everyone, I see a lot of papers with the spheroid generation topic. I know spheroids are used widely for simulation of tumor condition in body. Can someone say which abilities does the...
31 August 2020 3,323 3 View
Hi everybody, I have cultivated the C4-2 cell line in double charcoal stripped serum containing medium. A lot of the cells do not attach to the bottom of the flask. If someone has experience...
24 August 2020 9,634 2 View
I am culturing C4-2 cells in 15 cm dishes in different serumes of 5% FCS and 5% DCSS. since the cells are slow in attaching to the dish in DCSS compare to the FCS if someone has experience, can...
20 August 2020 1,535 1 View
Hi everybody, I wanna use an antibody to determine the presence of a protein in my chip-seq experiment. Can someone help me how can do concentration optimization for antibody which I use ? Thanks...
19 July 2020 9,619 3 View
Assuming that non-durable goods last less than three years on average, which direction do you think the world businesses and consumers are moving considering the huge environmental impact of...
27 May 2020 4,062 4 View
The industrial world is confronting the environmental side of sustainability. But, how do you evaluate the incentives - either from society or government- to convince them about sustainability...
09 May 2020 557 47 View
Hi everybody, Does anybody have experiences like getting different lifetime result by changing magnification from a sample? Can this factor lonely has influence on the lifetime of a tissue? Bests
20 March 2020 8,745 3 View
Hi everyone, I currently did some experiments with a pig serum (notnheat inactivated), which the control negative of that showed bacterial contamination. As I have to filter it befor using and I...
01 December 2019 8,649 3 View
I extract the primary RPE cells from pig. As I see in several time extraction high contamination of bacterial in my cell culture flask in the 3rd day after extraction. Sometimes they survive...
18 November 2019 8,623 5 View
I want to do wettability analysis of hydrocarbon oil (octane)/rock/surfactant solution system. but to do the analysis first I have to make rock surface oil-wet. Since hydrocarbon oil does not have...
27 February 2021 5,383 3 View
What is the disadvantages of high sulfur content to the ceramic burning process? and what is the effect of outranged viscosity?
24 February 2021 8,219 2 View
Oil and gas companies run gamma ray tool and take readings in API units while Gamma ray is also noted in cps, so how these units can be converted into each other?
24 February 2021 7,545 2 View
How can I remove my compound from paraffin oil? Mistakenly my compound fell in an oil. Compound = Europium complex
22 February 2021 5,667 2 View
I know, or think I do, the basic idea behind these natural structures, as from what I know they form due to water dripping from the top leaving a salt deposit behind. But started to wonder about...
22 February 2021 1,400 4 View
I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...
22 February 2021 5,324 3 View
During my trial for lubricant oil re-refinery process, I use NaOH as coagulant agent. After overnight of gravity settling, a solid layer in the surface was form. what product is that? since the...
22 February 2021 2,116 4 View
Basically, I would like to know how to treat or coat on the uncoated bare TiO2 (Ti-OH rich) surface with polymer which has anchoring groups in the polymer structure like trimethoxygroups. What is...
21 February 2021 4,657 6 View
I have a mixture of epoxidized oil and magnesium sulfate wich type of filtre paper should i use
21 February 2021 3,944 3 View
Hello, I am investigating properties of water in oil emulsion explosives. And adding hexamine (hexamethylenetetramine) into one of the phases that are used to make the emulsion should increase the...
21 February 2021 8,680 1 View