I'm looking for any article that best sums up the current understanding we have on metal enhanced fluorescence (MEF) and microwave accelerated MEF?

01 January 2018 1 568 Report

Can anybody point out any paper or letter or editorial or anything that can give an overview of the present know-how as well as where the fields of MEF and MAMEF are heading?

Mohammed Ubaid Hussein

micowaves may be accelerated by increases the vlotage from sourse as power supply while fluourences depend on laser usage

Badges
Science topic

More Arti Tyagi's questions See All

Why does my RT-qPCR reaction of microRNA shows amplification only after 40 cycles?

I am trying to construct a standard plot for miR21 and miR 200 (Cq vs conc.) using synthetic oligos but even on using miRNA concentrations of upto 100pM I only begin to get any amplification...

08 September 2019 6,103 9 View

Does the particle size reported with AFM images actually mean their height? Or is it the diameter?

I have tried depositing metal colloidal films on glass slides (paper attached). They reported particles sizes using AFM image analysis which is very small compared to what I have got. It could be...

01 February 2019 2,100 11 View

I need to experimentally determine the psf of my microscope using fluorescent beads?

I have captured the z-stacks using a nano-positioning stage. But I don't know how to analyse that data to calculate the psf. I have got an ImageJ plugin PSFGenerator. Can I find some sort of user...

05 June 2018 5,682 3 View

What is the difference between the various homologs of a single coenzyme?

I was looking for CoQ10 ELISA kits and I came across some labelled as 'CoQ10 binding protein homolog A, mitochondrial' or CoQ10... homolog B..' what is the difference between these two in terms...

03 April 2018 623 5 View

How do I check for successful coating of CYTOP on glass slides?

I need to deposit layers of CYTOP on glass slides and I plan to use spin coating method. How do I make sure the layers have formed a uniform coating?

02 March 2018 6,447 2 View

How can I prepare sample for SEM, TEM, and XRD?

I have a solution of magnetic nanoparticles that I need to characterise. How do I proceed?

01 February 2018 567 13 View

What do you man by silver island films(SiFs), in the context of metal enhanced fluorescence?

I need to understand the structure of SiFs.

31 December 2017 506 0 View

Can somebody explain this particular paragraph on surface plasmon resonance?

"The mean free path in gold and silver is ~50 nm, therefore in particles smaller than this, no scattering is expected from the bulk. Thus, all interactions are expected to be with the surface....

11 December 2017 4,703 3 View

Fluorescence assays: limit of detection

what are the current achievable standards in terms of lower detection limit in fluorescence based assays?

01 January 1970 2,018 7 View

Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

Weak DAPI staining after immunohistochemistry - how to improve?

After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...

05 August 2024 9,637 2 View

Are there any commercially available Donkey anti-Alpaca secondary antibodies?

Are there any fluorescently labeled anti-Alpaca secondary antibodies raised in Donkey? So far I have only been able to find anti-Alpaca secondaries raised in Goat. Or is this not possible due to...

04 August 2024 4,255 1 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

How to calculate the molar proportions of the oxides from the XRF analyses?

02 August 2024 2,565 2 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

How to add viscosity into a hyperelastic material such as Mooney-Rivlin rubber in LS-DYNA?

Hi, I am working on a head FE model and want to try different material types on brain. I read some papers that use Mooney-Rivlin rubber model and wondering if i can add viscosity into it. Is it...

24 July 2024 5,908 0 View

How to quantify the fluorescence intensity of only the merge area of an image using ImageJ software?

Dear All: I have to quantify the fluorescence intensity of cells that are fluorescent to two different markers, so i'm interested in finding out if this is possible. Previously I have...

22 July 2024 8,770 1 View

How to determine LOD values?

I am performing fluorescence experiments using a ligand to detect metal ions. I want to determine the Lowest Detection Limit (LOD) using the formula LOD = 3σ / K. However, I'm uncertain about...

19 July 2024 1,086 1 View

Identity behind this address?

May I request for change of pofile for this email address? It belongs to the ofice of the head of institution but the name attached is different. Kindly also include [email protected] being the...

17 July 2024 1,145 0 View