Hello everyone,
I am recently searching an validated ULK2 antibody. However, the molecular weight by the indicated antibodies from the data sheet is around 112 kD. In my opinion, though the 112 kD is the predicted molecular weight, ULK2 in fact should be around 150 kD, which is similar the ULK1 (around 150 kD). So, does anyone using the ULK2 antibody which has been validated by knockdown or knockout?
Thanks a lot in advance.
Zhiyuan
You might also want to look at Atlas Antibodies:
https://atlasantibodies.com/products/ULK2-antibody-HPA009027
While validation is not currently indicated, here are some other sources you may want to consdier:
https://www.linscottsdirectory.com/antibodies?q=ULK2
Thanks a lot for these good answers. And I have selected three antibodies from three companies. I will share the results here.
zhiyuan
Good luck Zhiyuan. Besides sharing the results here, please report your results on these two antibody review sites also:
http://pabmabs.com/wordpress/
https://www.antybuddy.com/reviews/ar/
Hi Zhiyuan,
I'd recommend doing a search on BenchSci and review published data instead of just choosing from a list. (https://www.benchsci.com)
Please see attached screenshot for more detail.
I hope this helps!
Maurice
- Badges
- Science topic
- Similar topics
- Biological Science
- Immunology
- Antibodies