I have performed combustion quite a few times but I am unable to do gasification. Is there a particular model in fluent or do we have to use a UDF.
Do we specify products in species transport or is there any other method.
Thanks
Please check this Masters thesis. Hope that will give some idea.
http://ir.uiowa.edu/cgi/viewcontent.cgi?article=2421&context=etd
Thank you for the answer sir.
But this thesis talks only about combustion part and not gasification.
Still it was helpful. Thank you very much sir.
Please, check this and try to contact with the author.
1.Article NUMERICAL SIMULATION OF GASIFICATION PROCESS FOR PALM EMPTY ...
2.https://www.youtube.com/watch?v=hB9vbvkh43Y
Sorry, I'm not providing an answer. I just want to say that partial oxidation or combustion with a great deficiency in oxygen is a "grey area" for even simple cases such as partial oxidation of methane into syngas without a catalyst.
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
How can we differentiate between calcite, dolomite, siderite, magnesite and ankerite minerals in carbonatite rocks in thin section under optical microscope?
07 August 2024 2,132 3 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
How to enhanced h-index in Research Gate?
04 August 2024 3,368 4 View
I want to do wavelet transform of some compounds for their comparative study? Kindly help me in this regard and provide with proper procedure.
31 July 2024 4,170 0 View
These days policy coordination is becoming necesssary on different front. In India also it is the same case. Monetary and Fiscal policy interface is important in order to address the...
30 July 2024 2,104 6 View
I am using CuBr/THPTA for a click reaction in total cell lysates. I am facing issues with my protein sample in non-reducing SDS-PAGE where it's not migrating properly and most of it remains at the...
29 July 2024 950 4 View
How to use energy flexibility in inventory modeling?
29 July 2024 2,192 5 View
Please send me updates regarding the above-mentioned areas in the question mark?
28 July 2024 5,197 3 View
Hi there, I did a CFA to 10 items on 2 latent variables. The model fit is too good and I've never seen it before. CFI / TLI = 1, RMSEA = 0. Is it okay, if everything else was done properly?...
24 July 2024 5,454 7 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,137 0 View
Hello; I am conducting a CFD study on two-phase flow in a separator, utilizing refrigerant as the working fluid. For this study, I have implemented pressure inlet and pressure outlet boundary...
25 July 2024 2,309 5 View
"When solar irradiation reaches a surface, some of it is absorbed while the rest is reflected. Part of the light absorbed by the surface transforms into heat and increases the module's...
13 July 2024 8,621 5 View
Hi, I am trying to model laser cladding in Ansys FLUENT. There are two phase: one is base metal surrounded by an inert gas (shown in the image). I want to add a cladding layer of the same metal....
07 July 2024 1,182 8 View
hello everyone i get into fuent and i select the result icone then i try to create an isosurface but the button is gray so i can't choose it. what's the problem? any suggestion.
03 July 2024 5,418 4 View
Regarding the system coupling issue where the update of the solution component fails, the system coupling update for fluid flow (Fluent) triggered an exception: "Update Solution Failed."
30 June 2024 7,894 1 View
I am simulating 1 cell of PEM with an area of 50 cm². The mesh has an orthogonality of 0.2 for the channels and bipoar plates (polyhedra) and a quality of 1 for the active zones (hexagonal). The...
26 June 2024 2,358 0 View
Magnetohydrodynamic generators are normally used as eihter an attachment to recycle wasted heat and flow of other generators, or used to absorb the energy from rocket thrusters. However, I'm...
24 June 2024 3,949 1 View
EMMS - Energy Minimization Multi-Scale
18 June 2024 5,857 2 View
I have a biomass with given ultimate and proximate analysis data. I am using Aspen plus for the simulation of gasification of biomass. In experimental data the gasifying agent air flow rate is...
18 June 2024 2,743 1 View