How to conduct Methodological Research?

Hi everyone, I plan to create a design for a system using previously published articles, journals, etc as a basis. I found methodological research design but I don't know how to conduct it. Like...

07 January 2021 5,824 3 View

What statistical tool to be used in finding the significant difference between face-to-face and online learning?

I only have one sample size. I want to find if there is a significance difference between BSED-Math Students' Perceptions on Face-to-Face and Online Mathematics Learning.

06 January 2021 8,470 1 View

Are there any reasech on loteprednol etabonate microemulsion or nanoemulsion?

The API (i.e. loteprednol etabonate )has poor solubility in water but has excellent solubility in Transcutol P which serves as cosurfactant in my microemulsion formulation. But when I added water...

24 September 2020 417 3 View

Losing Fluorescence after synthesis Europium oxide nanoparticle

09 May 2017 6,101 5 View

How can I get an uniform transparent conductive film (such as SnO2, ZnO) by ultrasonic spray ?

13 July 2016 5,776 3 View

I have a method in my thesis wherein i should dilute my 1 x 10^8 CFU/ml to Make it 1x10^5 CFU/ml. Is there any way this is possible?

06 May 2016 7,259 2 View

Lamin A-involved gene expression regulation?

the muations of lamin A can casuse many kinds of diseases, namely laminopathies. however, the mechanism is not well understood; especially how can general expression of lamin A lead to some...

22 February 2016 6,548 1 View

What is the impact of Cloud Computing in Education?

I am looking into the impact that cloud computing has had in the field of education.

20 February 2016 597 2 View

My PCR product always lost the last 10bp and also the digestion site, which made my ligation never work, can someone help me with this problem?

My PCR product always lost the last 10bp and also the digestion site, which made my ligation never work, can someone help me with this problem?Thank you so much!

13 January 2016 7,637 10 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

How to generate AA6061 alloy or any aluminium alloy crystal in material studio?

I need to carry out molecular dynamics simulation on Aluminium alloy. For this i need the crystal structure that which could be further replicated to form a structure.

22 February 2021 1,410 1 View