I would like to ask for the way to analyze the data using the Case study by Yin (2014). Can you tell me the process?

More Genesis Naparan's questions See All

What's the proper way to clean lactophenol blue from microscope slides?

Hi, I've been cleaning lactophenol blue from microscope slides using ethanol (70% or 96%) but I don't know if it's okay to mix them with lactophenol blue. I already looked for information in SDS,...

22 April 2024 1,251 1 View

Can SBF (Simulated Body Fluid) be sterilized in an autoclave or does it need to be sterile filtered?

After formulation, can SBF be sterilized in the autoclaved without damaging the components? Or should it be sterile-filtered?

11 February 2024 5,413 1 View

What is the correct way to calculate the optimal cell seeding density for a porous 3D-printed scaffold?

What is the correct way to calculate the optimal initial cell seeding density for a porous 3D-printed scaffold? The 3D-printed scaffolds are gyroid cubes (1cm^3), with ~78% porosity, a...

05 February 2024 4,214 0 View

TaqMan vs Traditional qRT-PCR?

Is It more cost effective to analyze multiple genes using TaqMan versus traditional qRT-PCR? What other main advantages and disadvantages exist for each method? I’m trying to analyze several...

05 February 2024 4,472 4 View

What could explain salt crystal formation on the surface of samples with cells cultured on calcium phosphate discs?

Hello all, We cultured MSCs on calcium phosphate discs for 3 days and 7 days. We are seeing strange crystal-like precipitates or something of the sort (images attached). They are found wherever...

24 July 2023 3,910 4 View

What might explain the EDS results showing greater wt% of Mg in undoped "pure" beta-TCP powder vs doped beta-TCP?

Hi All, We are trying to add Magnesium & Strontium dopants to our Beta Tricalcium Phosphate (b-TCP) powder. Recently, we obtained EDS data on the undoped b-TCP and doped b-TCP to see if the...

15 November 2022 4,427 3 View

How to troubleshoot fungal contamination in mammalian cell culture?

Hi all, I am dealing with a very stubborn fungal contamination issue in my mammalian cell cultures. I could really use some pointers for how to get rid of the contamination at present and how to...

29 July 2022 4,014 8 View

Methods to Detach & Lyse Cells Cultured on 3D-Printed Hydroxyapatite Scaffolds?

I am culturing MSCs on 3D-printed hydroxyapatite scaffolds. We need to detach cells from the 3D to analyze/quantify overall DNA content using Quant-iT PicoGreen dsDNA Reagents and Kit. However,...

20 June 2022 5,728 2 View

How long does cisplatin stay fresh?

Does anyone know how long fresh cisplatin lasts? I made a 10mM concentration with DMF for a dose response this morning and need to do a few more later and tomorrow. Can I keep my current 10mM...

11 October 2021 1,999 1 View

Why are my NIH 3T3 Cells dying after flow cytometry? Do they need CO2 levels controlled when running flow cytometry (loss of ~40% viability)?

UPDATE: the issue was the flow pressure being too high and cells being too sensitive to a loss of membrane integrity. I lowered the flow pressure and used a reagent/buffer that is designed to...

30 September 2021 1,385 2 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

Enhancing Critical Thinking Skills for Slow Learners: A Review of Empirical Studies?

to identify themes in question with APA style references

07 August 2024 2,239 5 View