Respected sir,

For FRP composites , we use hemp fibers. when i search in internet hemp fiber power is used as food.

if can give the purpose we can discuss on it

Akula Komuraiah you bought the powder of hemp fiber?

Respected sir,

first remove moisture from fibers, please read the following

1.Article Moisture Removal from Natural Jute Fibre by Plasma Drying Process

2. Article Reduction of Moisture Sensitivity in Natural Fibres

3. https://www.textilecoach.net/post/moisture-relation-of-textile-fibers

4.https://www.fibre2fashion.com/industry-article/1484/softening-of-coir-fibre-to-improve-flexibility

Akula Komuraiah Thank you.

Hello Maryam

In all honesty, I can't provide you with any relevant information.

Good luck

Break down the fibers: To turn the hemp fibers into a powder, you will need to break them down into smaller pieces. There are a few methods you can use:

Mechanical method, Utilize a mechanical grinder or mill to pulverize the fibers into a fine powder. This method is more efficient for larger quantities.

Nitrogen: https://applications.messergroup.com/cold-grinding

Lucky Saputra Thank you for your suggestion