I want tin oxide thin film for DSSc purpose. Can anyone suggest the best methodology?
hi
SnO2 thin films can prepare by sputtring method
Hi
The simple and cost-effective method for preparing tin oxides films are chemical spray pyrolysis technique by taking tin precursors. The deposition parameters can be controlled easily while deposition when compared to other techniques.
Tin oxide can be produced by most methods.
Solgel and evaporation (thermal or e-beam) are other methods which are suitable. I have done sputtering and ebeam with success.
Thank you all best wishers.................i tried by spray and sol gel but not getting good property also adherence is the big issue......
Sputtering and evaporation are best tech. But costly and we dont have such a systems............
For getting good properties for SnO2 thin films by chemical methods, I suggest you to go for annealing, which gives some improvement..
Hope you will Succeed.
I am working on metal oxide semiconductors and would like to know about how to calculate density of states in conduction band. Also what is its relationship with the orbital in conduction band?
08 September 2013 9,519 2 View
as we know 2KOH (aq) + SnCl2 (aq) ---> 2KCl (aq) + SnOH2 (s) similarlly 4KOH (aq) + SnCl2 (aq) ---> ??
10 November 2012 9,531 2 View
I want to prepare nano particles of size less then 10nm.
08 September 2012 5,594 0 View
I am a physics student hence facing difficulty.
08 September 2012 4,271 27 View
Does anyone have an idea on how to calculate the density of states in conduction band of SnO2 or how to modify it?
05 June 2012 10,040 1 View
Can anyone advise on how to preparee SnO2 by simple two electrode electrodeposition system?
05 June 2012 5,025 6 View
I want to know the procedure of dip coating for the synthesis of tin oxide thin film
05 June 2012 5,030 12 View
Do you think that MXene has much potential from environmental and commercial point of view as compared to Graphene ?
01 January 1970 8,096 4 View
A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...
11 August 2024 9,801 2 View
How can I measure the thickness of thin film by Uv-Vis?
06 August 2024 7,810 3 View
Why is TLC not a form of partition chromatography and paper chromatography not a form of absorption chromatography?
03 August 2024 7,035 3 View
I need something like Camag's VisionCat software for photodocumentation of TLCs. Could you recommend something?
31 July 2024 8,415 1 View
Hello, I'm trying to measure the conductivity of semiconductor films but since I don't have a commercial four point probe set up I would like to build one on my own in my lab. I have generators,...
30 July 2024 906 2 View
My final research is about making chitosan/pva hydrogel for wound healing using gelatin as crosslinker. Last month, i made the thin film hydrogel and it turn well. It was okay. Last week, i make...
28 July 2024 2,794 6 View
I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...
21 July 2024 1,559 1 View
I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...
16 July 2024 5,031 1 View
I am facing a difficulty to prepare the thin film which contains fluorine contained silica monomer, as we know F is highly reactive with low surface energy and it could be the reason of low...
09 July 2024 6,017 3 View
Hi, I need to measure the real-time (or temporal intervals) thickness variation of a transparent material from dry to wet/humid conditions, however, I cannot use the following techniques: -...
08 July 2024 4,799 4 View