I am working to find wear characteristics of hybrid composite using abaqus. I have problem for meshing the model.
I am trying to extract lipids using water as solvent. After extraction followed by centrifugation, I did not obtain any oil layer. Instead the supernatant was milky white, which I think might be...
30 October 2023 9,151 1 View
This is the chromatogram that I've received after running Supelco C8-C24 FAME mix in a TG-5MS (30m*0.25µm*025µm) of 5% phenyl methyl polysiloxane column. Kindly suggest the reason behind the...
30 October 2022 2,955 5 View
I need CAPR reagent for free fatty acid analysis. Can copper(II) acetate monohydrate be used for its preparation? Thanks in advance.
06 February 2022 211 1 View
I am a final year undergraduate Faculty of engineering university of peradeniya. I'm doing a research call "Impact of tsunami generated objects on coastal structures using Computational Fluid...
11 December 2019 7,081 2 View
I have a data set with marks of 430 study subjects. But it is not normally distributed. However, I want to divide the sample into four equal segments according to their scores. Is it ok to divide...
22 October 2019 1,012 3 View
Hello, I'm going to culture HepG2 cells soon, I studied many research articles but half of them culture HepG2 in 10% FBS in DMEM and rest of them used 10% FCS in DMEM. I was wondering as HepG2 is...
17 January 2017 6,993 10 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?
04 August 2024 1,078 1 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View
I am doing research on wear mechanism of the additive manufactured metal parts under dry condition. Please share the reference to start the analytical modelling of the wear prediction.
29 July 2024 6,115 0 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...
28 July 2024 8,169 0 View
Hello, I'm planning a shell exchanging experiment with two marine, hermit crab species inside of a tank. I only have one tank available for this experiment. I plan on running 30-40 shell...
20 July 2024 5,676 3 View
hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...
20 July 2024 647 2 View