How to run ACM models in Aspen plus?

More Ghasem Rajab Kalantar Zadeh's questions See All

What is the most suitable NMR solvent for carbon-based materials?

25 December 2020 5,020 4 View

Effect of adsorbent porosity on efficiency of adsorbent recovery ?

Hi guys. Can anyone answer the following with citing the references? 1) Relationship between adsorbent porosity and adsorption/desorption rate? 2)Relationship between porosity and adsorbent...

31 October 2020 6,323 5 View

Can COMSOL be used for (wild)fire modeling?

Has anyone any experience about fire modeling with COMSOL multi-physics? The software can simulate jet flames and combustion; however, as far as I have checked the literature, very few surveys...

30 September 2020 4,111 1 View

Where is the best location for placement of a magnetic filter in a amine system?

One solution which is presented for eliminating suspended Iron sulfide (FeS) contamination from refinery amine system, is using from magnetic separation. where location of amine circulation (rich...

09 September 2020 9,879 6 View

What is teaching? rethinking about concept of teaching after coronavirus?

every person knows that teaching is the most important weapon we can use change the world. but there is an important question which education ? or teaching? when I think this question my mind...

04 August 2020 6,998 3 View

Are there any studies on the relationship between "Employer Brand" and " Cognitive Neuroscience"?

18 July 2020 2,505 3 View

Which imaging satellites can provide highest temporal resolution for a specific area?

For our new project, we need to analyse Thermal Infrared satellite imagery of a specific area and the temporal resolution of image acquisition is quite important for an accurate study....

17 June 2020 3,212 4 View

What can be joint projects between chemistry and mechanical engineering?

how can I find a common related project between chemistry (polymers or biomolecules) and mechanical engineering( for example fluid mechanics )???

15 April 2020 2,388 1 View

COVID-19 and Renewable Energy?

High oil prices, environmental crises, and increasing energy demand have been the driving forces for rapid growth of renewable energy worldwide. All these forces have been weakened by COVID-19....

28 March 2020 3,752 20 View

Can we utilize Fresnel lens instead of dish collectors?

Hello Can we use Fresnel lens in order to concentrate the solar energy on a point (instead of using a dish collector)? If so, is there any problem or limitation about using that? Please consider...

05 March 2020 2,218 3 View

How long does it take to get a modeller(for homology modelling) license?

I submitted my e-mail address on modeller website to get a license. The problem is that, the site cannot process my school e-mail (ewhain.net). I submitted my Lab website and school name so that...

25 February 2021 9,054 3 View

How to overcome convergence issues in concrete arch models?

Hi, I have modelled a three-span arch bridge with soil fill over along with pedestals. The FE modelling is done in LUSAS with HX8M solid elements (i.e. 3D solid modelling). The non-linearity is...

20 February 2021 1,346 2 View

Aspen Plus Error: Unknown or undefined bead number?

Hello, in my Aspen Plus Simulation (see attachment) there are two heat exchangers. One HEX1 (oil+gas) ist fed by hot gas which ist coming out of a burner. The other HEX2 (gas+gas) shall work as a...

14 February 2021 8,096 2 View

How to model Type 1 collagen structure for finite element analysis ?

I have started a project in which stress distribution in Type 1-collagen scaffold is to be modelled. I am thinking of using finite element analysis to model the structure and the loading...

07 February 2021 5,487 3 View

How to use the Embedded Region constrain on Abaqus CAE?

Hello fellow academics, For my Final Year Project, I am looking into different ways of modelling the interface between PVA and gelatin. I have successfully modeled the interface using the "tied"...

04 February 2021 8,698 1 View

Can we incorporate unnatural amino acids into protein using software for graphical image purpose?

I am looking to incorporate a unnatural amino acids which is not available in the swisssidechain database into a protein crystal structure of pdb? I am using chimera 1.14 vis. tool?

26 January 2021 4,064 3 View

ANSYS APDL RC Beam modelling?

Hello I have modelled RC beam in ANSYS apdl. first create volume, then create keypoints & create a line joining that keypoints to make reinforcement. I am working on thermal analysis, for...

20 January 2021 7,344 2 View

How to match results from based paper and Ansys Workbench in modeling piezoelectric?

Hi guys, I have modeled a laminated composite beam patched with piezoelectric layers in Ansys Workbench, but the results are far away the results reported in base paper. I have attached the...

13 January 2021 7,356 3 View

In OpenSees, how to remove elements whose sections are modeled with fiber ?

I want to remove some of the pieces of a concrete column. The cross section of the concrete column is modeled with fibers. In my plan, after giving a horizontal displacement of 50 mm by...

06 January 2021 1,934 2 View

Natural frequency extraction with ABAQUS?

I have modeled the RC beam with simply supported BC and I have got the frequency value for the case of the beam, but I have 150 modes for each analysis and I have to see them one by one to find...

05 January 2021 8,626 3 View

Syed Ali Ammar Taqvi

You could import your Aspen Custom Model into Aspen Plus environment.

Thanks,

Aliyu Abdulhammeed Bello

If you're using Version 9 and lower, you will require Microsoft Visual studio Fortran and C/C++ libraries before you can export the model for use in Hysys or Plus.

If you're using Version 10, provision is provided to export the model in a suitable format for use in version 10 of Hysys or Plus.

Check out this tutorial: https://submodelist.blogspot.com/2015/07/membrane-reactor-level-2.html

Regards.

Ghasem Rajab Kalantar Zadeh

thanks very much Aliyu.

your proposed tutorial will be very useful for me.

Best wishes!