How to restart analysis of impact loads in abaqus / exiplicit ?

More Enas Mabrook's questions See All

How to analyze data using Markov chains with time series ?

I have data for a seven-year monthly time series and apply Markov chains

10 December 2020 9,129 4 View

How to simulate repeated impact load in abaqus?

Why, when I did the modeling, the result of the analysis give an increase in the value of impact force in the subsequent strokes while it was supposed to decrease.

31 August 2020 1,531 2 View

Please, how are we determining the precision of dbscan clustering in the Python code?

06 July 2020 5,300 2 View

How can I write sub-model in lingo program?

I have a stochastic mixed-integer non-linear model and it is difficult to be solved. So I want to write the constraints with uniform distribution in the sub-model that is found in the whole model....

01 March 2020 3,541 3 View

How to define contact pair in abaqus/explicit and how to define domain of contact ?

I want to contact rigid body impact load to structural member

10 April 2019 8,364 3 View

How to extract results for analysis in abaqus /explicit?

when analysis impact loads on structural member in abaqus and take time period =0.5 , I don't know how to take result for history output from abaqus to excel and are the results taken as they are...

20 February 2019 7,467 4 View

Why when use abaqus program to analysis is abroted and massage the time increment is less than the minimum specified ?

why when use abaqus program to analysis is abroted and massage the time increment is less than the minimum specified ?

23 January 2019 1,886 5 View

What are the consequences of using ML libraries without any understanding?

Implementing Machine learning algorithms from scratch is one of the most challenging tasks, however, using ready-to-use ML libraries without any background could also have consequences! In your...

28 July 2018 7,787 4 View

Why has Python considered as the most effective artificial intelligence programming language?

Python has been around for decades and now becomes the most used machine learning and artificial intelligence programming language. Just for discussion, why it becomes the most effective tool for...

28 July 2018 1,736 9 View

Hi, is there anybody know how to convert amount of fertilizer from mg/pot to kg/ha ?

how can I convert fertiliser amount from mg/pot if I have pot volume 10 kg soil or diameter of pot

10 December 2017 6,904 19 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View

How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials?

Hi, all! How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials? I have not find the choice for explicit element in Abaqus CAE. I am wondering whether it is possible...

25 February 2021 9,936 2 View

Is it possible to do optimization for a submodel in Abaqus?

I'm trying to run an optimization in Abaqus for a submodel with no luck, jobs are not being create for submission. Is this even possible? or is Abaqus limited to do Opt. for the model itself...

24 February 2021 4,908 5 View

Enas Mabrook

Thank you, but when I following this step in the video the analysis of the impact force is zero in step two, why ?

Pranoy Nair

Enas Mabrook , it would help if you can share the step data (in .inp file) that you've been using in your analysis.

Pranoy Nair, how to share the inp file of step data