How to perform Non linear buckling analysis in ANSYS??

More Samadhan Morkhade's questions See All

About registration of multi-sensor images?

I am working registration of multispectral and SAR images. Multispectral imagery is a level 2 orthorectified imagery and SAR imagery is a level 2 georeferenced image. The spatial resolution of...

12 January 2021 7,586 2 View

How to perform mesh convergence analysis study in ANSYS?

Importance of mesh convergence

26 December 2020 7,511 4 View

How to incorporate geometrical nonlinearity in a finite element model using ANSYS?

07 December 2020 730 3 View

What is the effect of changing sequence of factors and their levels in Taguchi orthogonal array?

I am performing a set of experiments using the Taguchi orthogonal array. In this regard, I would like to know if we change the sequence of factors and their levels (sequence only; possible levels...

12 August 2020 8,624 2 View

What are the benefits of selecting a higher size orthogonal array in Taguchi design of experiments?

I would like to design an orthogonal array of trials for the Taguchi method. I have 4 independent variables, each having 5 levels. Therefore, the minimum no. of trials that are required come out...

08 August 2020 639 4 View

About registration of multisensor images captured by different remote sensing satellites?

If the two georeferenced images captured by different remote sensors are to be registered, is it fair enough to consider the first-order polynomial?

15 June 2020 3,724 0 View

Selection of Taguchi orthogonal array design?

I want to use Taguchi method for my work. I have 6 factors with different no. of levels. Factor 1 is having 6 levels and factor 3 is having 4 levels. Remaining factors have 5 levels. How should I...

05 May 2019 5,699 3 View

What is the difference between HH and HV polarized SAR images?

I am working on fusion of SAR and multispectral data for land use land cover classification. I have HH and HV polarized SAR images and multispectral images in the VNIR band. I would like to know...

03 January 2019 9,715 3 View

How to decompose an image using a-trous wavelet in python?

I want to decompose an image using a-trous wavelet. I would like to use python for this task. How it can be implemented in python? Please guide. Thanks a lot.

05 September 2018 6,403 1 View

How to display 16 bit satellite image in python(About Fusion of 16 bit images)?

I want to fuse two 16 bit satellite images using GDAL library in python. I had processed images using PIL, pywavelet libraries. But 16 bit images are not properly displayed in python. I would like...

25 December 2017 5,765 1 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

How to normalize and take the significance of the MTT OD values with 3 replicates for the same cell-line?

Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...

07 August 2024 8,106 4 View

Rifat Reşatoğlu

A lot of university websites and books also give beautiful demos for beginners to start with,

http://www2.warwick.ac.uk/fac/sc... ansys.pdf

http://www.mece.ualberta.ca/ tutorials/ansys/

UK Department of Mechanical Engineering ansystutor.html

http://www.engineerpedia.com

https://web.cimne.upc.e du/users/xmartinez/MAE 656/index.html (Beautiful resource to start with)

Amazon.com Help m/ANSYS‐Workbench‐ Tutorial‐Release‐ 14/dp/1585037540

http://myweb.ncku.edu.t w/~hhlee/Myweb_at_NC KU/ANSYS14.html

http://www.springer.co m/engineering/mechanic al+engineering/book/97 8‐0‐387‐28289‐3

Phoenix Analysis & Design Technologies /blog/ (Useful tips and tricks for Ansys users. Very valuable to improve and widen the knowledge of Ansys package, both Workbench and APDL)

Home (Beautiful forum, guess this is an only place where top‐level users share their experience)

Kent L Lawrence ansys/ansys_examples.htm

ANSYS Workbench ED Tutorial

Ansys Tutorial for Beginners | Ansys Structural Tutorial | Ansys Stress Analysis Tutorial

Samadhan Morkhade

Dear Sir,

Thank you very much for the information provided.

Manuel Ramsaier

Are you looking for a Ansys Classical introduction or Ansys Workbench. Assuming Workbench, I did one introduction recently, which I can recommend doing, as it does a good job of presenting the background as well as how its modeled in Ansys.

https://www.youtube.com/watch?v=7ePBKlkGFqE

Good luck and all the best. Buckling is really important to consider!