How to perform an electrochemical deposition of gold nanoparticels suspension in citrate buffer on the working electrode of an electrochemical cell?

02 February 2019 1 5K Report

i have screen printed electrode and i want to deposit gold nanoparticels on the workig electrode , the particles suspension in citrate buffer. how to do that using electrochemistry?

Mohammad Harahsheh

interested

Badges
Science method

More Tasneem Harahsheh's questions See All

What is the reason for cyclic voltagram shift to the right then to the left as shown in the attached figure ?

screen printed carbon electrode was characterized using 5 mM Ferricyanide/ 5mM Ferrocyanide with 0.1 M KCL , with scan rate from 10 to 100 mV/s vs Ag/AgCl , why the shift go to the right then to...

03 April 2019 8,994 6 View

How to modify screen printed electrode with AuNPs using thiosalicylic acid ?

I have gold nanoparticles suspension in citrate buffer and i want to modify the WE of screen printed electrode with is particles using thiosalicylic acid , if any one faced similar work, please...

03 April 2019 1,969 3 View

How to deposit gold nanoparticle onto (commercial) disposable screen printed carbon?

i have carbon screen printed electrode and gold nano particles suspension in citrate buffer, how to deposit the particles on the electrode in a way to get uniform distribution?

02 March 2019 8,337 5 View

If i have protein amino acid sequence how to get the 3D structure?

i have amino acid sequence of protein and I am looking for a free tool can predict the 3d structure, also i have the aptamer of this protein and i want to know how they bind with each other ?

01 February 2019 760 6 View

How should I deposit a mono layer of gold nanoparticles on a screen printed carbon electrode (purchased) using Langmuir?

How should I deposit a mono layer of gold nanoparticles (suspension in citrate buffer ) on a screen printed carbon electrode (purchased) using Langmuir?

31 December 2018 4,829 3 View

How to design read out circuit for electrochemical sensor?

hello, iam working on an electrochemical sensor, to detect protein biomarker using DNA prob, i want to design a read out circuit for my sensor, also i want to know what is the differantce between...

10 November 2018 4,134 3 View

What is the basic different between IDA and SPE?

Currently Iam working on amperometric biosensor using SPCE (screen printed carbon electrode) but I still confuse to figure out what is the different between this electrode with Interdigitated...

10 November 2018 9,810 2 View

What is the optimum dimensions for interdigitated amperometric biosensor?

what is the optimum dimensions for interdigitated amperometric Label-free biosensor( Length, width and separation) for detect protein bio-marker ? also what is the best chose for working...

09 October 2018 3,967 2 View

What are the best solvants and surfactants to deposit gold nanoparticles on carbon substrates using langmuir?

Hello everyone! I am going to start depositing GNPs (diameter around 20nm) on a carbon electrode using Langmuir-Blodgett technique, and I would like to know what is the best solution to start...

09 October 2018 1,369 1 View

How to regenerate a SPE biosensor?

hello! iam working on a biosensor design, to detect her2 protein using single strand DNA BIORECEPTOR, i need buffer to unbind thiol-modified oligo from AuNP, also a buffer to unbind PROTEIN-DNA...

09 October 2018 1,007 2 View

Is changing the medium during the experiment overestimate the results?

I am experimenting with cancer and non-cancer cells in a 12-well plate for 4 days with a seeding density 1*10^4/well, however, I noticed that the control group growth rate slows down on D3. Should...

07 August 2024 2,283 2 View

AMAXA Lonza nucleofection lower volume of buffer?

Does anyone tried to do nucleofection with AMAXA by Lonza with lower than recommended amount of buffer in the cuvettes (100 ul)?

07 August 2024 4,616 0 View

How to normalize and take the significance of the MTT OD values with 3 replicates for the same cell-line?

Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...

07 August 2024 8,106 4 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

Why I can't see any band in SDS-PAGE?

Currently, when I run SDS-PAGE, I don't see any bands at all, even though I used the same material just a day ago and it worked fine.... In our lab, we dilute the 10X running buffer to 1X and...

06 August 2024 5,373 2 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

Can you recommend a 96-well plate for minimal cell adherence to the wells during phagocytosis experiments?

I have been performing short phagocytosis experiments using 96-round bottom, tissue culture treated, well plates (Falcon, 353077). I culture the cells with the phagocytic cargo for 2-4hrs, wash...

04 August 2024 5,228 4 View

PBMC infection with virus?

In my study, I intend to infect PBMCs with SARS-CoV-2. After that, I will analyze NK cells by flow cytometry to see if their phenotype changes or if they show degranulation. After the infection, I...

01 August 2024 4,403 4 View

What is the best blank for nanodrop if I want to read a recombinant protein concentration?

Is it the "elution buffer" or the "dialysis buffer"? Note: I'll be using NanoDrop OneC

01 August 2024 967 3 View

Found this object in the cell culture - do you have any suggestions what it might be?

Dear researchers, Today, we found this object in one of the wells of a 96wp culture plate. The plate contained MEC-1 cells and GelTrex. I am quite curious what this is (because it's not cells). Do...

01 August 2024 2,250 2 View