Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

Does any one can help me choose a reasonable basis set for intermediate metal ions interactions with guanine (i.e Fe2+, Mn2+, Cu2+ and exc.)?

Hello every body Does any one has any idea to help me choose a reasonable basis set for intermediate metal ions (i.e Fe2+, Mn2+, Cu2+ and exc.) interactions with guanine or other DNA organic...

01 March 2021 6,187 2 View

Tooth extraction and subsequent dental implant placement in Sprague-Dawley rats induce differential changes in anterior digastric myofibre size and ?

01 March 2021 7,254 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How can we theoretically calculate Elemental analysis(percentage) of atoms in covalent organic framework?

For example in one research article the Elemental analysis values of COF-TpPa-1 ( Triformylphloroglucinol (Tp) (63 mg, 0.3 mmol), Paraphenylenediamine (Pa-1) (48 mg, 0.45 mmol) are as follows...

24 February 2021 1,265 6 View

Is there any teachers based in UK who would like to take part in my study?

24 February 2021 4,833 3 View

Inpatient DBT to reduce parasuicidal behaviour?

Currently trying to obtain as many pieces of research as possible for my dissertation around the implementation of DBT within the inpatient unit for those with a diagnosis of BPD. Primarily...

23 February 2021 5,654 2 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Alginate and silk fibroin hydrogels toxic to cells?

Hello, I asm currently working with alginate and silk fibroin hydrogels. I prepared a blend of alginate and aqueous silk fibroin (straight from dialysis) and resorted to ionic crosslinking to...

23 February 2021 8,249 2 View

How can we obtain a modification factor for creep parameters?

I want to obtain standard creep parameters of salt rock by creep parameters of rectangular samples. Is there a modification factor to convert creep parameters of rectangular (prismatic) rock salt...

01 March 2021 7,131 1 View

How to obtain creep parameters for running Norton Bailey model, material SS-304 ?

How to obtain creep parameters for running Norton Bailey model, material SS-304 ?

06 January 2021 8,074 2 View

How to calculate tensile creep modulus of a liquid crystal polymer for a given load ?

Hi, I have the attached tensile creep modulus behavior for Vectra H140 (LCP material). The loads on the chart are 30 MPa, 40 MPa, whereas I am interested in the creep modulus for 15 MPa. Could...

15 December 2020 9,914 1 View

Which method is best applied to calculate the crack widths and check the crack control provisions in the super-long post-tensioned concrete slab?

For a super-long post-tensioned concrete slab, in which cracks are especially caused by restraint and predominantly formed by shortening due to shrinkage, creep, and elastic shortening of the slab...

19 November 2020 3,453 3 View

How to simulate fracture in the axle housing ?

Hey there, I want to simulate & analyze the fracture and fatigue (crack growth) in the rear axle housing of heavy tracks (Volvo company) in Abaqus. My question is which method is suitable for...

12 November 2020 3,377 3 View

How can I specify the parameters for nano creep?

Which parameters should I employ for nano creep testing of Titanium and Inconel alloys? Should I load it with a constant load rate or strain rate? What should be the maximum load? What should be...

29 October 2020 5,727 4 View

An FCC alloy is preferred against a BCC alloy for high temperature creep applications. Why?

Austenitic stainless steels (FCC) has better creep resistance as compared to Ferritic stainless steel.

05 October 2020 255 9 View

Can Fluent simulate flow at very very low Re accurately?

Im trying to simulate a flow in a geometry which has a very very low Re (creeping flow). Currently I'm using Laminar flow as my model in fluent. I believe it is the only option for such flow. Will...

26 August 2020 8,663 4 View

Derivation of Rice and Tracey equation???

12 July 2020 6,555 1 View

How to do crack propagation study ?

I have a scenario in which I need to do crack initiation & propagation study . Based on the load which is applied on the component, crack needs to be initiated . Once it is initiated, the same...

07 July 2020 3,838 2 View