Already they have done in COMSOL software. But i verified for other dimensions and material properties, the obtained results are not satisfied. In that paper, they have done three analysis for rotating blade:
1) Modal analysis of beam in COMSOL (without rotation)
(Note: Boundary condition - left side of the beam is fixed, right side -free)
2) Modal analysis with rotation, considering stress stiffening and spin softening.
(Note: Boundary condition - left side of the beam is fixed, right side -free, Axis of rotation - Y-axis)
3) Modal Modal analysis with rotation, considering stress stiffening, spin softening and coriolis effect.
(Note: Boundary condition - left side of the beam is fixed, right side -free, Axis of rotation - Y-axis)
That paper is attached for reference here.