How many times Polyamide(PA-12) powder can be reused ?

I would like to know the exact number like it can be reused for 5 or 10 times etc.

26 April 2020 1,538 2 View

How exactly we can compare a sample manufactured by Additive manufacturing using X-ray CT and Optical Microscopy?

I need to compare the sample for porosity determination by using x-ray CT and optical microscopy. All views and suggestions are welcome.

27 March 2020 6,417 3 View

Is it possible to coat PTFE on PP to decrease surface energy?

I would like to know about the coating possibilities of PTFE on PP or any other fluorinated polymer on PP to decrease surface energy. All suggestions are welcome.

27 March 2020 9,623 3 View

Is there any mathematical relation between water velocity and temperature?

I have a model which depicts that when velocity of the water increases at the inlet, temperature measured across the outlet decreases. The results are shown below INLET VELOCITY(m/s)...

05 April 2016 1,934 14 View

I need to image mesoporous silica nanoparticles that are in ~100 nm size and do high resolution TEM to look at mesopores. what grids should I use?

Need to image mesoporous silica nanoparticles using the TEM. Also, need high resolution TEM images to see the mesoporous structure. Kindly suggest what kind of grids to use. Thanks, Shatadru

02 March 2021 1,787 2 View

Which SAR dataset to use for generating coherency matrix and performing target decomposition (Description) ?

Working on chandrayaan-2 DFSAR data, there are three datasets available: 1) Slant range image data product: The slant range complex image file. Each pixel is represented by two 4-byte floating...

02 March 2021 8,481 3 View

Which cell line should we use to perform biological dosimetry experiments?

We are preparing some experiments based on irradiating cells under different conditions in order to evaluate the effects in terms of DNA damage, genetic expression, etc. As our project is...

01 March 2021 3,355 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

B-mercaptoethanol (BME) protocol?

Hi everybody, I have been running a multiplex IHC which allow me to stain the same tissue with different markers (Primary Ab + Secondary conjugated Ab) (AF487, AF555, AF647). Since I would like to...

27 February 2021 5,028 2 View

What pH condition required to coat APTES on silica coated Fe3O4?

It's a hydrolysis reaction, which may produce by either acid or base-catalyzed reaction. so can anybody help me with this, which condition is suitable for this reaction?

26 February 2021 1,760 8 View

Quantifying leaking DNA from bacteria - what's the secret?

Hi, all! I need to determine if my treatment causes membrane damage in bacteria (S. aureus and E. cloacae), but I cannot use a fluorescent probe such as PI and similar ones because my compound is...

24 February 2021 2,006 2 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

How to Control Whiteflies in coconut leaves?

24 February 2021 1,005 1 View

Any references about insects or animals that can damage or weathering of rock or fossil material?

Are there any references to insects or animals that can cause damage or weathering to the rock or fossil material? books or paper that would be nice. Thank you very much!

24 February 2021 6,805 3 View