How can I determine the volume of IPTG required for 500 ml bacterial culture? The concentration of the IPTG will be 0.5 mM but in our lab, the available IPTG concentration is 100 mM. So, how I can make 100mM to 0.5mM? How much IPTG is needed here for 500 ml culture?
This is just basic math. If your starting concentration is 100mM and you need a final concentration of 0.5mM, that would be a 200 fold dilution. So 1/200 x 500 = 2.5. Or the general equation would be 0.5 x 500 / 100 = 2.5
Hey, Hossain, you can follow the simple equation to solve this and others similar calculation by using this: Actual volume of culture* Required concentration/ Available Stock concentration.
like in your case
Actual volume of culture= 500ml
Required Concentration= 0.5 mM
Available Stock concentration= 100 mM
Hope you get the solution.
The volume of IPTG (0.5 mM) required for 500 ml bacterial culture can be calculated using the following formula: Volume of IPTG (in ml) = (0.5 mM x 500 ml) / 100 mM Therefore, the volume of IPTG required for 500 ml bacterial culture is 2.5 ml.
To make 100 mM IPTG to 0.5 mM, you need to dilute it. To do this, you need to take 0.1 ml of the 100 mM IPTG solution and add it to 19.9 ml of buffer, distilled water, or other suitable diluent. This will give you a final concentration of 0.5 mM.
IPTG volume is dependent on the culture size and the desired IPTG concentration. Typically, IPTG is used at a concentration of 0.1 mM in bacterial cultures. To determine the volume of IPTG needed for a particular bacterial culture, you can use the following formula: Volume of IPTG (in µL) = (Culture Volume (in mL)) × (Desired IPTG Concentration (in mM)) For example, if the culture volume is 10 mL and the desired IPTG concentration is 0.1 mM, then the volume of IPTG needed is 1 µL.
- Badges
- Science topic