How to determine the concentration of copper oxide nanoparticles in aqueous solution

More Kemal Düzkar's questions See All

When simulating the turning process in Abaqus, I cannot see chip formation in the results. What should I do?

Hi everyone, I am a beginner in ABAQUS and have modeled a turning operation using dynamic explicit. The results are kinda meaningful but it does not display the chip formation at all. 1-The...

14 June 2024 2,100 2 View

How to measure seepage through embankment dam which is under construction practically on site?

dam which is under construction has seepage problem in internal clay core and the dam made slide now. am interested to study these failure and needs different techniques to measure the seepage...

02 April 2023 2,641 0 View

Hi All, How can quantity of seepage on embankment dam under construction analysed?

am working my research on evaluation of seepage and slope stability analysis of embankment dams . the dam is under construction and the dam clay core made slide due to different reasons. some of...

14 February 2023 3,435 3 View

I have a fully converged CFD simulation in Fluent. The total mass imbalance does not match with what i calculate on my own using surface integrals?

My combustion simulation is fully converged. The mass imbalance that Fluent calculates is 3×10^-9. However, if i calculate the mass imbalance from the average surface integrals, as...

13 January 2023 1,619 7 View

Does R automatically create dummy variables?

I want to do logistic regression analysis in R studio with glm function. I have categorical independent values as lithology, land use, aspect. I would like to be sure that does r automatically...

11 December 2021 1,859 5 View

What is the range for the Transformed Vegetation Index (TVI)?

Hello, I"ve been wondering if anyone knows of a reference that lists the range for TVI. I could reason from the formula that it should be from 0 to ~1.22 since the range for NDVI is between -1 and...

07 May 2020 729 4 View

Can you determining Inventory Model (Continous vs Periodic) based on material consumption historical data?

Hello fellow researchers. I want to have your insigth on the categorization of inventory model based on demand pattern data. i have 8 item in different consumption value class and of course...

24 February 2020 5,969 3 View

Is There any rule of thumb for categorizing inventory model/system based on variation of demand and goods value?

Dear fellow researcher Currently im working on my thesis about inventory management policy in raliway industry in indonesia. this company has just started 7 month ago, so probabbly the data that...

09 January 2020 1,285 4 View

Should I remove zooplankton present in the incubation bottle when measuring primary production rates?

I am wondering if a high density of zooplankton may interfere with the measurement of primary production (either via C14 uptake or the oxygen method). Sometimes our samples have very high...

03 April 2019 9,793 6 View

How can I calculate the thermal conductivity of liquids flowing inside the tube in shell-and-tube heat exchanger?

I carried out an experiment consist of shell-and-tube heat exchanger, and collect the temperature data.Then I calculated the overall heat transfer coefficient and heat transfer rate of both...

09 February 2019 5,915 20 View

Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

Why does my protein refolded to beta sheet during thermal denaturation analysis?

Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...

06 August 2024 1,989 3 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

Can i quantify a nanoparticle encapsulated in cell culture medium by hplc?

Hello, if you made a transwell assay where you incubate the cells with a nanoparticle-encapsulated drug and considering that in the oposite compartment you'll have both the free and encapsulte...

03 August 2024 2,730 1 View

Some new emerging problems on application of RL for scheduling in IoT networks?

I have seen plenty of existing works on applied Reinforcement Learning (RL) policies for optimized scheduling in IoT networks including Q-learning, DQNs, and the newer ones including PPO for...

01 August 2024 8,754 2 View

Isam Eldin Hussein Elgailani

Please look at the following below links which may help you in your analysis:

https://pubs.acs.org/doi/10.1021/cm061596d

http://www.doiserbia.nb.rs/img/doi/0354-9836/2017/0354-98361500026K.pdf

http://www.biotechrep.ir/article_69202_e635cabd52ca76595f432e1abbdde2e8.pdf

Thanks

Shrikaant Kulkarni

You can follow the kinetics of the CuO nanoparticles formation using UV -Vis spectroscopy on developing calibration curve.

Anagi M Balachandra

You can use either UV-Vis spectroscopy or ICP.

Sina Ghassa

You can analyze the Cu concentration by ICP and calculate CuO concentration. You can also use X-Ray Florescent (XRF) for analyzing the CuO in your solution.