How to coat graphene oxide on magnesium alloy for implant application?

More Kalaiyarasan Madhu's questions See All

How Triton-x removes SDS from SDS-Polyacrylamide gel?

I came to know about removal of SDS from Polyacrylamide gel is done by Triton-X, but what is the exact mechanism of its removal. How Triton-x does that? Thank you

03 February 2021 7,206 2 View

How can i calculate diffusion barrier of Li ion on graphene nanoribon using SIESTA?

I'm a new siesta learner, I'm working on lithium-ion batteries, I have calculated adsorption energy but i am not able to calculate diffusion barrier of Li ion. kindly help me how to calculate...

14 January 2021 2,688 1 View

How to resolve the negative peaks in RI detector ?

I am using Phenomenax rezex column with 5 mN H2SO4 as eluent flowing through the column at flow rate of 0.6 ml/min. RI temperature is 36C and column temperature is 60C. At the time of glucose...

17 November 2020 2,297 4 View

Incorrect bandstructure of zigzag ZnO ?

I'm a beginner in siesta code. I'm trying to simulate zigzag Zno structure using siesta. After optimization I found that Zn atoms form an unwanted bond which I think could be reason for incorrect...

03 January 2020 7,833 3 View

How to separate mixture of two organic compounds?

I have mixture of two organic compounds one with molecular weight 226.41g/mol and other is 166.22 g/mol. Can I use size exclusion chromatography for the difference of 60 g/mol? Kindly do let me...

04 December 2019 9,952 3 View

What is emotional intelligence?

Emotional intelligence is one of the important factors determining success of an individual. How can a person manage his own emotions and the emotions of others for achieving his/ her goals in an...

02 December 2019 6,305 8 View

What are the free alternatives to Graphpad prism to generate graphs for publication?

can anyone suggest software apart from R studio? (for windows 10).

08 January 2019 6,836 2 View

Can anybody provide me matlab code for Chaotic Numbers?

Chaotic based matlab code

19 April 2018 8,600 2 View

If the paper is uploaded on arxiv, why does astrobiologist editor think it as already published? If so what is the next step for author to resolve?

I usually upload the article on arxiv before sending it to a journal to protect copy rights. If the editor does not no what is arxiv and rejects your article, then what is the next step?

15 April 2018 6,789 4 View

I have a convergence error solving electro-thermal analysis for a power diode in ANSYS?

I am trying to simulate a power diode in ANSYS and do a electro-thermal simulation to observe the thermal and electrical characteristics. I am facing a convergence problem while trying to simulate...

08 March 2018 4,746 3 View

How do I increase the yield of my PCR product?

Hello, We would like to increase the yield of our PCR product. We are running a series of PCR reactions that is targeting ~1.1kb sequence. We begin each reaction with ~400pg of template DNA...

02 March 2021 4,029 3 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

How to determine solutionizing time for cast Al alloys?

For wrought alloys soaking time at solutionizing temperature is determined by thickness .Do we have such standards for cast Al alloys

23 February 2021 8,839 3 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

Muhammad Chhattal

BY using CVD chemical vapour desposition method. this is most reliable and efficnet method. but also little difficult

Aydin Bordbar-Khiabani

You can deposit the GO or rGO particles on magnesium alloy substrate by simple and cost-effective electrophoretic deposition (EPD) technique. For obtaining better adhesion of EPD coating on the substrate, you can use pre-treatment methods such as sandblasting, plasma electrolytic oxidation (PEO), also known as micro-arc oxidation (MAO) and etc. Please refer our manuscript which was recently published in this matter.

Article Electrophoretic deposition of graphene oxide on plasma elect...