Modelling the interaction between high energy alpha particle and solid material?

04 May 2017 5,583 7 View

How can we create electron-puddle in the 2D-transition metal dichalcogenides?

In the intrinsic graphene on substrate like SiO2, electron-hole puddles appears due to the charge impurity below graphene. Roughly, we can visualize these electron-hole puddles as dynamic p-n...

07 August 2016 5,990 0 View

What properties do the carrier located at intersection of surface state and bulk conduction band have, for 3D topological insulator?

06 July 2016 7,957 2 View

How can the interface potential between two material can be measured experimentally?

Generally, when metal comes into contact with semiconductor, there would be forming schottky barrier at the interface. And at the interface, there exists a depletion region where there is no...

06 July 2016 3,763 4 View

How does the temperature degrade the voltage output from metal/semiconductor contact solar cell?

I read some literature on solar cell, all of which state that the voltage output of schottky-type solar cell will be reduced with rising temperature. But what i have learned from literature in...

31 December 2015 6,851 5 View

What is the relation between electron affinity and the number of layers of layered structure material?

07 August 2015 9,098 0 View

Why is silicon quantum dot considered a solar cell?

I recently have read literature on quantum-dot based solar cell. Basically the colloidal quantum dots are ideal materials. But i dont know why is that?

06 July 2015 5,005 4 View

Can two dimensional materials be used as electrolytes of fuel cell?

One question about solid state fuel cell: Can the van der waals heterostructure be used as electrolyte of fuel cell? In other words, van der waals heterostructure is impermeable or permeable to...

01 February 2015 2,948 7 View

How do you perform differentiation for measured sets of data?

I want to fit the I-V curve of a diode using the diode equation. The I-V curve is presented in the form of ln(I) vs V. But I want to know the dV/d(ln(I)) vs I, in order to extract the barrier...

01 February 2015 5,500 3 View

Since graphene can be magnetized by some approaches, we could regard graphene as a spin emitter?

Why not use graphene with spin polarized as a spin injector?

31 December 2014 5,653 1 View

Is there a powerful system for the security of the systems distributed on IoT systems?

Is there a powerful system for the security of the systems distributed on IoT systems?

02 March 2021 3,858 10 View

How Relativistic effects is one reason for lanthanide contraction?

The Lanthanide contraction which is the decrease in ionic radii of the elements in the lanthanide series from atomic number 57, lanthanum, to 71, lutetium, is due to poor shielding of the 4f...

01 March 2021 2,272 4 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

Is there a deep reason for using the squared modulus of the wave function as the probability density of the existence of the particle?

I think we were all surprised at the first time we got to know quantum mechanics that the squared modulus of the wave function is the probability density of the existence of the particle? The role...

28 February 2021 6,282 9 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

How to calculate battery consumption for IoT device?

Hi, everyone I'm working on a privacy-preserving algorithm that will apply to IoT devices. So, I need to measure the power consumption by implementing this algorithm. Any suggestion, advice,...

25 February 2021 8,749 6 View

How vulnerable is water and wastewater infrastructure to cyber terrorism in an age of IoT?

Im looking for any papers, reports,articles, links etc on information on How vulnerable is water and wastewater infrastructure to cyber terrorism in an age of IoT.

24 February 2021 2,750 4 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View