How to build the constitutive model for brittle material in FEM abaqus software?

More Rashid Ali Laghari's questions See All

Help me to identify these fungal slides?

These fungal slides are isolated from cultured Bread mold on PDA media and smear is treated with Lacto phenol Blue dye ..

13 July 2024 9,701 1 View

Query Regarding the Impedance EIS Data?

Respected All Research Members. Actulaay I faced the problem while analysis the EIS Data as i got the value of Z" negative. What should be the possible reason for this. Thank you in advance

03 July 2024 4,336 3 View

Can anyone suggest an adhesive that can sustain 600C?

I have to join tungsten wire to metallic plate with that adhesive and entire assembly has to be heated upto 600C in ultra high vacuum. I know about zirconia paste but it is not readily available...

18 June 2024 3,092 3 View

Kindly help me to identify this fungal slide ?

fungal inoculum treated with lacto phenol blue and observed under microscope anyone help me to identify and share some information regarding this fungal slide

07 June 2024 9,647 3 View

How the dropped packet is being transmitted in RPL DODAG?

I am implementing an enhanced objective function for RPL. Control messages and data packets of UDP applications are being transmitted. Now the question is that if any data packet which is being...

02 June 2024 3,418 2 View

In what specific applications are rotating heat pipes most advantageous compared to traditional heat pipes?

Explain your ideas

07 May 2024 4,553 2 View

Will it cause any problem to take 7% Margin of Error for determine sample size in Stratified Sampling Technique?

Greetings, I am Mamun. I just want to know that if I use 7% margin of error than will it cause any problem in future analysis? I am using stratified sampling technique, for this if i take 7%...

06 April 2024 2,344 6 View

What are the openly available data sources that may be gathered and used for research publications?

02 March 2024 6,825 3 View

How do I remove a publication that is not mine from my account?

In opening up my account, I accidentally picked publications that are not mine and I would like to remove it from my account. Please advise/remove them. and also close this account. I am running...

27 February 2024 7,549 0 View

Is it possible to get three or more than three kids/offspring from a single goat/doe as she comes in heat and met by more than two bucks, at a time?

simultaneously

24 February 2024 284 2 View

How to get moment output in Abaqus Standart?

I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...

08 August 2024 4,831 4 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

Short Synthesis of Graphene Oxide from Natural Graphite Flakes?

I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...

01 August 2024 8,368 2 View

Simulation of metal drawing by Abaqus with UMAT?

Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...

30 July 2024 7,062 1 View

Why running a restart analysis in Abaqus in Ubuntu OS gives an error as attached when running the same job in Windows doesn't give any error and runs?

I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...

29 July 2024 9,572 3 View

How Can I Apply Hashin Damage Properties to Solid Elements in Abaqus Without Using VUMAT?

Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...

28 July 2024 8,169 0 View

Has anyone looked into the stability of FEM methods on curved meshed?

Google scholar isn't giving me any results on this

27 July 2024 595 2 View

Abaqus cylinder buckling riks analysis?

hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...

20 July 2024 647 2 View

Karthigeyan . S

You can built constitutive model for brittle material..you can built the model using commercial software like PLAXIS or using in ABAQUS. which software are you using for the analysis..

Mohamad Khorashad

In Abaqus software some built-in models are for brittle material failure model. You can also write user subroutines for your model.

Alaa Hussein Al-Zuhairi

Please you are referred to the attached article

regards