I wanted to use my own material and i don't how to include the stress strain graph in Ansys.
https://sites.ualberta.ca/~wmoussa/AnsysTutorial/IT/NonLinearMat/NonLinearMat.html
Please refer to ANSYS Tutorial.
It's very easy by defining material
Hi all, I'm doing a non linear analysis using ansys. Total the assy contains housing,valve and a stopper. the housing and stopper are rigid material (PP/PC) and valve is silicone (shore 70 A)....
03 April 2019 835 7 View
I want friction coefficient values of various standard metals such as EN10025-2 EN JS1072 UNS C27400 UNS C93200 UNS C95800 UNS C95800 UNS J02501 UNS S15500 UNS S31635 (EN 1.4571) I couldn't find...
08 September 2018 9,951 4 View
I'm planning to do a particle impact test on a substrate. i know Abaqus as well, but i wanted to give a try in Ansys Explicit Dynamics. is it possible ? because i have done some work in explicit...
06 July 2018 4,060 4 View
I'm planning to model a moving substrate where particles will be deposited on the substrate, the problem description is about thermal spraying of metal particles onto a moving substrate. i don't...
06 July 2018 8,778 4 View
I'm doing a CFD simulation of a commercial Ceiling Fan in a cubic room using MRF method, where i'm monitoring the torque ,volumetric flow rate. By seeing the volumetric flow rate results i'm...
05 June 2018 6,476 3 View
I am doing the CFD simulation of 7 feet fan (136 rpm) using Fluent, I modelled the geometry of fan with domain and a cubic room and made Boolean(subtract the wall(target) from rotating domain(tool...
05 June 2018 2,687 3 View
I couldn't save an image with correct post processing. whenever i click white background and quality and aspect ratio. my Ansys fluent is not showing the correct picture lighting , it looks very...
04 May 2018 627 0 View
i am now doing simulation in DPM model viscous k - omega species transport of N2 and C02 and injections titanium with all specified diameter distribution(rossin rammler) and temperature and...
31 December 2017 9,478 1 View
Dispersed phase model pressure of one phase is 4.5 MPA and another phase is 4.52 MPA . fine mesh courant no - 10 (changed but still problem persists)
11 December 2017 3,509 12 View
I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?
11 August 2024 3,115 1 View
I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.
11 August 2024 9,101 4 View
I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?
11 August 2024 5,138 1 View
Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!
11 August 2024 3,770 4 View
Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...
10 August 2024 7,180 0 View
I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...
10 August 2024 7,429 2 View
How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?
09 August 2024 7,718 0 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View