How to do Matrix inversion using FPGA ?

I need to implement matrix inversion in hardware. The size of the matrix can be anywhere from 50 *50 to 8*8. Are ready-made standard codes available or inbuilt modules available with FPGA...

15 February 2021 4,006 3 View

How to get the natural frequencies and mode shapes using several acceleration data?

I am using FDD (code I used - https://uk.mathworks.com/matlabcentral/fileexchange/50988-frequency-domain-decomposition-fdd) to extract the natural frequencies and mode shapes using the...

03 January 2021 4,038 2 View

What are the different units of determining the concentrations of gases in ambient air?

Gases in ambient air are measured in various units. Like ppm, ppb, percentages, microgtam per cubic meter etc. What are these exactly? I am new to the air field. earlier I worked with soil and...

27 November 2020 3,908 1 View

Are oil glands present in sandalwood? Or it is a byproduct of sapwood to heartwood formation?

I came to know that there is no oilglands in sandalwood and it is a byproduct during transformation of sapwood to heartwood. Is it true?

04 October 2020 8,216 2 View

How to get consensus of results produced by four miRNA target prediction algorithms (RNA22, miRanda, TargetFinder and psRNATarget)?

Different miRNA target prediction algorithms use different scores which is not comparable directly. So what is the most reliable way to get the consensus of results produced by different miRNA...

24 August 2020 9,659 4 View

Is it useful to have consensus of results produced by four miRNA target prediction algorithms (RNA22, miRanda, TargetFinder and psRNATarget)?

RNA22, miRanda, TargetFinder, and psRNATarget are four different algorithms aiming at finding miRNA targets. Many research-work claims at using a consensus of the result produced by these...

23 August 2020 5,058 5 View

Is there any proven relationship between COVID-19 death and air pollution?

It is observed that, the cities with higher air pollution witnessed comparatively more no of deaths of COVID-19 infected patients in the world. Kindly provide your valuable inputs regarding the...

08 April 2020 4,384 30 View

How to draw the sketch of mealybug?

Dear Taxonomist This is Satish Harde from Jalna Maharashtra India, i want to know what is the method to draw the sketch of mealybug or any insect as shown in the attached file. Thanks with...

28 March 2020 5,044 3 View

Is any research paper available on bioinsecticidal properties of some plant extracts on Cowpea weevil (Callosobruchus maculatus)?

We want to see the bioinsecticidal properties of some plant extracts on Cowpea weevil (Callosobruchus maculatus) on stored Cowpea Vigna unguiculata.

13 February 2020 8,987 8 View

Can anybody suggest some good book on "Global Warming"?

I am searching for a book comprising the causes, effects and solutions of global warming. It would be very helpful if anybody can suggest some book or relevant literature.

11 February 2020 1,687 4 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View

How to Eliminate cosine error and abbe error in LASER measurement system(for example Rhenishaw XL80)?

I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...

28 February 2021 4,890 3 View

Concrete compressive strength databases?

I am looking for datasets similar to this one: http://archive.ics.uci.edu/ml/datasets/Concrete+Compressive+Strength I am looking for concretes with different types of aggregates (Recycled,...

27 February 2021 6,801 3 View

How to measure angle between laser travel path and machine axis in Laser Measurement system?

25 February 2021 1,987 3 View

How to properly calculate the fluid solid heat transfer between polypropylene matrix and glass fiber in a porous medium?

I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium

24 February 2021 1,915 1 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

How can I measure the thickness of thin layers deposited on textured glass susbtrates?

I want to measure the thickness of aluminum oxide and titanium oxide layers deposited on textured glass substates. The layer thicknesses are typically below 100nm.

21 February 2021 5,465 4 View

How can I measure the surface interaction or surface interfacial chemistry between polishing abrasives and upper surface of substrate ?

I am working on polishing abrasives. I need to do few characterizations ? which can provide the on time surface chemistry of substrate with polishing abrasive during optical polishing. I would...

18 February 2021 5,319 3 View

No title

The regenerated cellulose film was prepared by zinc chloride/H2O system. The zinc chloride had been washed away in the regeneration process, and the wet film which was not dried had uniform...

18 February 2021 9,538 1 View