How can I modify surface of scaffold by hydrolysis?

More Saleheh Shahmoradi's questions See All

What are the appropriate and usable questions in the phenomenological method?

I am looking for appropriate questions for interview in phenomenology?

07 May 2024 1,091 3 View

Is it possible to know where we exactly are (with nano metric accuracy) and deposit Antibodies on substrate at the same time using an AFM tip?

We want to attach a kind of antibody to a silicon substrate using an AFM (Atomic Force Microscopy) tip. A major obstacle which we have tried to overcome is that we are supposed to put antibodies...

28 September 2017 2,015 2 View

How I can recognize the polydopamine from dopamine?

Hi everybody!! I'm sorry because maybe i don't explain better my problem. I know from the literature the potentiality of the polydopamine to cover every type of substrates and it cuold be easy its...

18 March 2016 1,985 5 View

How I can recognize the polydopamine from dopamine?

Hi everybody!! I synthesize the polydopamine from the dopamine in basic condition (Tris buffer 10mM pH 8,5) and I can see the change of the color from brown to dark; I try with the UV spectroscopy...

17 March 2016 6,436 4 View

How can I measure encapsulation efficiency?

HI, everybody. I have a problem like Tatiana. My drug is fat soluble, but my nanocapsules are emulsion from oil and water soluble material. I would like to measure encapsulation efficiency by...

11 March 2016 4,135 9 View

Effect of hydrolysis on FTIR?

Hi. Does hydrolysis of polymeric scaffolds change FTIR ?

31 January 2016 652 3 View

Does time delay between two stages of electrospininng have effect on nanofibers on foil?

I would like to use electrospinning to fabricate PCL scaffold. But I have to use time delay. Does it affect on nanofibers?

03 May 2015 2,516 5 View

Does type of gas (oxygen or argon or nitrogen) in plasma treatment have effect on the efficiency?

I should choose type on gas to modify surface of PCL scaffold. is it important?

17 April 2015 8,594 4 View

What kind of adaptive filter do you suggest for MIMO system identification?

Hi, I have a system with 8 inputs and 3 outputs. These signals are nonstationary. What is the best adaptive scheme to model this system? Should it be nonlinear? Should I first perform a kind of...

21 July 2014 8,391 5 View

What is the exact procedure and materials for converting from ester to carbolic acid by base hydrolysis??

11 July 2024 4,645 3 View

Can Invitrogen™ LIVE/DEAD™ Cell Imaging Kit (488/570) be used on fixed cells?

Can the kit from Invitrogen™ LIVE/DEAD™ Cell Imaging Kit (488/570) be used on fixed cells on a scaffold?

08 July 2024 7,914 3 View

How to calculate the proportions in grams or milliliters of the compounds for 60 mL of SAPO-11 zeolite precursor gel?

It is required to make a precursor gel for a SAPO-11 Zeolite, the compounds are the following: * As a source of Al: Aluminum Isopropoxide (98%) Formula: C9 H21 O3 Al PM: 204.24 g/mol Density:...

01 July 2024 617 3 View

How to decide mass scaling in ABAQUS?

I am doing orthogonal cutting of aluminum. My forces are changing according to mass scaling. How to decide the scaling factor?

01 July 2024 3,749 0 View

Why my mesh convergence is failing in ABAQUS?

I am doing 2D orthogonal cutting simulation in ABAQUS for aluminum. Reducing mesh size up to 0.08 mm reduces the error to 3% but further reduction leads to increase in error from 3 to 39%. Why I...

23 June 2024 9,080 0 View

ABAQUS - Face could not be partitioned. How to resolve this error?

I am doing orthogonal machining of aluminum in 2D. However, when partitioning for depth of cut with a sketch on face strategy with a parting line, it says that face could not be partitioned. How...

18 June 2024 8,000 0 View

"What is the best method and model for evaluating the mechanical and viscoelastic properties of a viscous material with multiple particle inclusions?

"What is the most accurate method and model for evaluating the effective mechanical and viscoelastic properties due to the inclusion of multiple types of particles in a viscous material, and which...

16 June 2024 9,139 1 View

What is the materials composition of automotibles?

What share is made of steel? Plastics and glass? Aluminum? Iron?

15 June 2024 7,246 2 View

What aluminum alloys are used in piston production?

Interesting and of piston production methods.

27 May 2024 1,112 3 View

Outof Brass,Copper,Gold,Aluminum,Stainless steel,Silver Which is the best material used as meshing material for regenerator while design of cryocoole?

while designing of stirling type pulse tube cryocooler which parameters are considered for meshing material of regenerator? and Out of Brass,Copper,Gold,Aluminum,Stainless steel,Silver Which is...

22 May 2024 3,728 0 View

Saleheh Shahmoradi

thanks for your answer.

I want to try polycaprolactone. So according to your word, I should use at least 3ml solution in electrospinning for separating it easily.

thank you for your advices

yes,I use aluminum foil.

now I'm trying to find how can I remove the foil. maybe I should use more volume of solution for fabrication of scaffold.

Julio César Sánchez Pech

Hi, in my work, I drove the degradation of the PCL with hidrolisys, you can verify. Thank you

Thesis OBTENCIÓN DE UN ANDAMIO TUBULAR DE ÁCIDO POLI (LÁCTICO-CO-GL...

thanks