How can I measure the Magnetic feild generated due to current applied in Graphene?

More Sanghamitra Debroy's questions See All

Can anyone give some inputs on Al2S3 inclusion in steel?

Under what circumstances they are likely to form? Are they stable inclusions or they get converted to some other phase by reacting with steel or oxides in steel? Any literature on the same would...

19 August 2020 5,126 4 View

Why does the charge-transfer resistance decrease over cycle in graphite/NMC full cell?

I did EIS on a full cell (graphite vs NMC) with NMC as working electrode in coin cell format. The result shows decreasing trend of 2nd semi-circle (refers to charge transfer resistance) over the...

10 January 2020 3,777 2 View

Can mechanical boundary conditions be applied during thermal modelling in ABAQUS?

I am modelling the heat transfer analysis of a wire electrode during the wire EDM process in ABAQUS. Can anyone please help how to apply the wire pre tension in the model as a boundary condition....

06 January 2019 1,760 3 View

DFLUX subroutine in abaqus for gaussian heat flux for a single spark?

I am trying to model a single spark discharge for electric discharge machining process in abaqus using DFLUX subroutine. The heat flux for my model is Gaussian distributed for an axisymmetric...

25 September 2018 6,320 5 View

Are heat and fluid flow simulations that expedite qualification, reduce cost and improve quality widely used in additive manufacturing industry?

It now takes many years of laborious work to qualify an additive manufacturing (AM) component. The process involves selecting a specific AM process and alloy by conducting experiments, examining...

30 March 2018 3,789 1 View

How to prepare the samples for trace elements in Urine samples for ICP MS?

I need to analyse the trace elements in urine samples by ICP MS. Can I simply acidify them with 2% HNo3 and go for 1:10 dilution or should I go for microwave digestion.Any suggestions...

16 May 2017 3,561 4 View

Is it possible to assess serum expression of MMP2 and IFN gamma by western blotting?

To asses reproductive toxicity

26 December 2012 9,019 2 View

Does PG remover degrades monolayer graphene properties from electronic point of view?

i am using pg remover for removing su8 from monolayer graphene. will that hamper or degrade the electronic properties of monolayer graphene?

01 January 1970 2,070 2 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

How do I determine the degree of polymerization of PEG 400 based on NMR integration?

Hello, I am working on the photocatalytic degradation of PEG 400. I would like to know if it's possible to determine the degree on polymerization based on NMR integration, or by the MW of the...

02 March 2021 6,186 3 View

Do you know any MR image dataset?

I would like to research on MR images (0.5T and 3T). Can you please suggest some websites that I can download dataset including both 0.5T and 3T MR images? Thank you.

02 March 2021 7,735 3 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

What could be some reasons why unstimulated monocytes are getting activated?

Im doing PBMC isolation -> CD14+ enrichment using magnetic beads -> stimulation setup. My negative control is just cells in cRPMI but they seem to get activated over and over again.

28 February 2021 7,883 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Modeling viscosity using model of Chung?

Hello, As part of simulation of gases mixture and water, I need to calculate viscosity of the fluid components and I am using relationships proposed by Chung et al. (1988). The irony is while I...

25 February 2021 8,053 5 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

Model Volume fraction and magnetic field applications of nanofluids in ANSYS?

Hi I am working recently on a project where I have to study how the thermal properties or heat transfer enhancement of nanofluids as the volume fraction changes, or if a magnetic field is applied...

22 February 2021 961 2 View

Marek Wojciech Gutowski

Are you going to 'see' magnetic field at a scale of elementary cell? That will be rather difficult, even if you apply Lorentz microscopy. If the investigations are done at macroscopic scale, say few mm, then why should anybody expect anything else as can be 'seen' around any metallic sheet of similar size?

Sanghamitra Debroy

The graphene here is in Micrometer dimension.

Jihao Li

You can try to use the macro statistics