My problem got aborted and the warning message shows "3 nodes have dof on which incorrect boundary conditions may have been specified. The nodes have been identified in node set WarnNodeBCIncorrectDof"..... how can i find the node set WarnNodeBCIncorrectDof from ABAQUS?..
Go to the vewer (postprocessor) open the display group manager, choose node sets to display and click on the set name WarnNodeBCIncorrectDof.
You may need to check the "highlight in viewport" box; then the nodes in the set will be marked as red dots.
open the odb file and expand the tree in the left and fine node sets then you will the set you want
When the Job is aborted due to error and the error nodes are created, how could it be found out? As the ODB file could not be produced due to errors??
Abaqus should write an odb if there are just wrong bc or so.If no odb is written, there must be some other mistake preventing that.
hi all, How can I fix the model in the nodes for the warning "WarnNodeBCInactiveDof." ?
does anyone know how significant is this warning ? and how to solve it ?
5 nodes have inactive dof on which boundary conditions are specified. The nodes have been identified in node set ErrNodeBCInactiveDof.
Analysis Input File Processor exited with an error.
Ali Benouis Share picture of your model along with asking question. Are you using axe symmetric problem? If yes, remove BC's from Axes of symmetry of deform-able part. If you are applying BC's on such faces which are sharing a comment corner to each other then, also this error arise. I am not sure about what exactly is your model about.
hello, in the static calculation the model works normal (three-point bending), but when I implanted the load under table, I found this message.
thank you.
It seems like you are applying two boundary conditions on one location which is not an appropriate procedure. The boundary conditions are not correct. Upload .CAE and .Jnl file so that we can have better understanding. Ali Benouis I am using Abaqus 6.14-1
Tufail Mabood Martin Baeker Hello, how can I solve these warnings
( Boundary conditions are specified on inactive dof of 1 nodes. The nodes have been identified in node set WarnNodeBCInactiveDof. )
Are you can help me , I studding Crystal Plasticity Finite Element Modelling (CPFEM) by using User subroutine UMAT . thanks,
Go to the visualization module then open display group manager, select node sets to display WarnNodeBCIncorrectDof.
Why after selecting this option in edit load window, 'Follow nodal rotation' we get the error message of "nodes have inactive dof on which boundary conditions are specified" ?? aren't the nodes in a 3D model have maximum dof already ?
- Badges
- Science topic