How can I define hashin criterion for CFRP tendon with solid element in ABAQUS?

Navid Arvin @Navid-Arvin

10 April 2015 1 9K Report

Michael May

Per default, the Hashin criterion can only be applied to shell and Tshell elements in Abaqus.

If you want to use the Hashin criterion with solids you will have to write a user defined material.

Badges
Science topic

More Navid Arvin's questions See All

Hi, plaese guide anyone, how can we find the work function from XPS valance band potential?

Answer need on urgent base please.

16 January 2024 5,350 5 View

What is the composition of glass used in hermetic connectors and how to process sealing glass to metal?

Glass to metal in hermetic connectors

14 January 2024 4,633 3 View

IAST selectivity and heat of adsorption?

Dear all, I have worked on the gas uptake with MOFs and now I need to calculate IAST selectivity and HOA. I've used python code which is published in some papers but it did not work for me. I...

25 December 2023 5,090 0 View

What if neither of the generated sequences have the primer sequences? Would that mean the sequences generated were of bad/low quality?

We had sent some phytoplankton samples for sequencing. And we had just received the generated sequences, and the next step was to do BLAST to identify what the phytoplankton that we sent is....

26 August 2023 6,284 2 View

Can anyone help me with Sciex Q-TOF? What are Gas 1 and Gas 2, and also what is curtain gas?

I'm trying to switch a method established on Agilent Q-TOF to Sciex.

16 August 2023 2,565 2 View

Which kind of body fluid is applicable to measure MicroRNAs ? , AND What are challenges to detect MicroRNAs in body fluid samples?

To measure and detect MicroRNAs, researchers face many challenges, Some of them are: 1- Small size 2- Similarity in sequence in the same family 3- A tiny amount in the sample

19 June 2023 6,034 3 View

What to do for smooth peeling off of semi refined carrageen film from plastic petridish?

I have prepared thin films from semi refined carrageenan with hydrophilic cross linkers. But smooth peel off has been the issue for a long time.

06 June 2023 6,014 2 View

Fatigue and determination of life in the metal support structure of pressure vessels?

I am conducting an earthquake-induced fatigue study on the metal supports of the pressure vessels, which is responsible for the stability of the structure.

11 May 2023 4,649 2 View

Fatigue life calculation in pressure vessels using the Paris equation?

At the junction of the metal supports of the pressure tank, a crack has been observed that grows due to the earthquake. How is the fatigue life of the structure confirmed against the lateral force...

14 April 2023 1,296 2 View

fatigue life of the pressure vessel?

determining the fatigue life of metal bases of pressure vessels

14 April 2023 9,456 1 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

How to get moment output in Abaqus Standart?

I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...

08 August 2024 4,831 4 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

Simulation of metal drawing by Abaqus with UMAT?

Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...

30 July 2024 7,062 1 View