fatigue life of the pressure vessel?

Navid Asadpour @Navid-Asadpour

15 April 2023 1 9K Report

determining the fatigue life of metal bases of pressure vessels

Kaushik Shandilya

Dear friend Navid Asadpour

To determine the fatigue life of the metal bases of pressure vessels, the following steps can be followed:

Conduct a detailed inspection of the pressure vessel to identify any existing cracks or damage.

Determine the material properties of the metal used in the construction of the pressure vessel, including the yield strength and the fatigue strength.

Conduct a stress analysis of the pressure vessel under typical operating conditions to determine the maximum stress that the metal bases are subjected to.

Use the Paris equation or other appropriate fatigue analysis methods to estimate the fatigue life of the metal bases based on the maximum stress and the material properties.

Consider factors such as the effect of cyclic loading, the frequency of inspections, and the expected lifespan of the pressure vessel in determining an appropriate fatigue life.

It is important to note that determining the fatigue life of a pressure vessel is a complex process that requires specialized expertise and should be performed by qualified professionals. It is also essential to comply with relevant industry standards and regulations to ensure the safety and reliability of the pressure vessel.

Badges
Science topic

More Navid Asadpour's questions See All

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

Does anyone here uses the Software for Roche LightCycler 2.0 instrument?

Hi everyone, If anyone here uses Roche LightCycler 2.0 instrument for qPCR experiments, I would appreciate if they message me. I have some questions about it. Best - Navid

12 October 2020 6,234 2 View

What is an acceptable FDR% for proteomics data publication?

Is there an established convention on this? I have heard from experts that 1% FDR is recommended. I was wondering can we report protein IDs at 5% FDR. Is there any published guidelines on this? If...

25 August 2020 1,231 4 View

Does the expiration date affect the binding capacity of Ni-NTA?

Hello! I have some expired Ni-NTA resin (QIAGEN), and I need to purify my His-tagged protein. Does the expiration date affect the binding capacity of Ni-NTA? Thank you in advance

11 June 2020 5,773 5 View

How can concrete be modeled with a GFI in ABAQUS?

Hello dears I am modelling concrete in the Abaqus and need to know GFI behavior and parameters them. How can concrete be modeled to the ABAQUS? Thanks

03 March 2020 4,116 3 View

Is there any good free software to simulate electron trajectory in non-uniform electric field?

Need to simulate electron trajectory in non-uniform electric field.

08 February 2020 8,963 3 View

New project in Cathodic Protection?

What fields (topics) do you suggest to work as a metallurgy and Technical Inspection master degree Student in Cathodic Protection? Thank you kindly

17 January 2020 4,201 5 View

Should the effective stresses be constant during the effective stress numerical analysis?

Assuming running the undrained effective stress analysis in FLAC3D via Config FLUID using the effective stiffness and strength parameters, are we expecting the constant effective stresses in the...

15 July 2019 6,096 3 View

How to model the distribution of the population from a facility to other near facilities (for example a school) when it is decided to be destroyed ?

how can we model the distribution of the population from a facility to other near facilities (for example a school or a hospital) when it is decided to be destroyed

25 June 2019 4,220 3 View

Fluorescent staining of bacteria and fungi?

Hi all scientists, I am going to determine the LIVE/ DEAD fungi and bacteria cells with fluorescent dye in the possible biofilm on my plastic films surface. I have TTC (tetrazolium chloride) but...

05 June 2019 2,709 2 View

Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

Is there any test to determine the cardiovascular risk of patients with obesity? from the perspective of obesity?

We found tests to determine cardiovascular risk taking into account lipid profile, blood pressure, age, history of diabetes, other laboratories. But when weight is involved, there is a paradox. I...

02 March 2021 6,036 1 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What SPSS analysis should I run with one IV (with two levels) and two DVs?

Hi, I am trying to figure out which test would be most appropriate to run for the following question: Is there a difference in task blood pressure between smokers and non-smokers? There are two...

01 March 2021 8,235 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View