I made a gel from matrigel in 24 well plates and wanna cut some part of it. I wonder if sb can give me some hints to do so?
Hi,
may be you can use one of the Ibidi inserts and put the gel into it then after removing the inserts you can get the gel in parts and you don't have to cut it.
check the link below
http://ibidi.com/applications/wound-healing-and-migration/
Good luck
Oh great. Many thanks, Sherif.
I start learning about synchronization between different states and criticality in Parkinson's disease. Would it be possible for someone to recommend a relevant and practical review paper that...
20 August 2022 4,068 4 View
I don't find any option in the post-processing results to plot the residual velocity of the projectile and also the Resultant force after the impact. I modeled an impact between a shell...
23 August 2021 8,915 1 View
I am working on the adaptation of the Human RotaVirus on Vero cell line. Unfortunately, I haven't seen a significant and obvious CPE after infection. The virus that I use is purified from a...
10 October 2019 7,284 0 View
There are a wide range of epoxy resins and agents for epoxy reinforced braided carbon fibers composites, I was wondering how I can choose between different options?
07 July 2019 7,999 7 View
Dear researchers I want to analysis a microbial derived crude extract and find the dominant bioactive metabolite within. As I don’t know anything about the bio-compound composition and likely...
24 July 2018 4,735 8 View
Iridology (also known as iridodiagnosis or iridiagnosis) is an alternative medicine technique whose proponents claim that patterns, colors, and other characteristics of the iris can be examined to...
17 March 2018 4,493 5 View
I am more interested in knowing the impact of electrodes dimensions rather than the geometry factor on OFET's characteristics, e.g. ON current.
21 October 2017 1,849 1 View
I have used peptization with acidic solution, but I want to know more about other surface treatments which inhibit agglomeration of particles.
23 September 2017 2,352 6 View
I want to coat glass substrates with silicone materials, but the coating does not adhere well and it removes easily. Is there any solution to improve adhesion without needing to surface treatment...
23 September 2017 1,875 4 View
Gold bottom and top electrodes are evaporated and the dielectric polymer is spin-coated. I can think of dewetting of gold electrode or rough gold surface causing short-crcuit between top and...
08 August 2017 3,370 6 View
I got these smeared bands quite often lately. We typically run the gel at 140V with a 10-12% gel and do a wet transfer at 220 mA for 1.5 hr in cold room. We also noticed some dirty spots/dots (see...
10 August 2024 7,480 3 View
Hi, I know that low molecular weight (MW) molecules generally tend to have higher mobility, while high molecular weight molecules tend to have lower mobility. However, in my experimental...
06 August 2024 1,495 2 View
I have been working on Red blood cell-derived extracellular vesicles as Antisense Oligonucleotide (ASO) carriers. We normally run agarose gel to quantify the loading efficiency. I used naked ASO...
06 August 2024 3,130 2 View
After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...
05 August 2024 9,637 2 View
I am having an issue with my gel image where my PCR product is not appearing very bright on the gel. When I perform gel extraction, the A260/280 purity value is very low. I used the Qiagen gel...
05 August 2024 9,798 3 View
kindly reply me. Thanking you in advance.
05 August 2024 7,727 4 View
I have tried several times to isolate lymphocytes from mouse spleen, but all attempts have been unsuccessful. I tried most available protocols. I used different dissociation media (HBSS with Ca...
04 August 2024 9,913 7 View
Is it possible to conduct a molecular dynamics simulation to see the effects of a specific carbohydrate on the structure of lipids (e.g., micelle structure)? I am a beginner in this field and plan...
03 August 2024 3,371 3 View
I am using a windows system, what software I should use for hydration shell analysis with molecular dynamics?
02 August 2024 3,143 4 View
Molecular docking software/ websites?
02 August 2024 8,704 7 View