I need to measure the stiffness of nano grass substrates with different densities. How can I simulate this and how can I instrumentally approve it? Indentation methods don't seems to be applicable here as their measurements are localised.
Refer this link:http://worldwidescience.org/topicpages/g/global+stiffness+matrix.html
see:
http://worldwidescience.org/topicpages/g/global+stiffness+matrix.html
I believe that obtaining 'authentic' results is pretty hard, so this brings me here to check if I am doing things right. I would like to detect a protein using Alexa 568 Ab in my cells. I tuned...
09 October 2018 9,219 4 View
Some journals ask for a plain text manuscript where there is a need to convert all the references to plain texts. I know this can be done using EndNote, but is there a similar process defined for...
07 August 2018 7,043 6 View
I need to label my cells with a nano particle and I don't want the particles to enter cells for a time period of 21 days.
05 June 2016 5,809 3 View
I need to deposit Fe3O4 thin film over PDMS and I think sputtering is the best option available. However, I do not have an iron oxide target. That is why I was thinking of making a Fe3O4 target...
04 May 2016 6,360 5 View
RGD is a tripeptide composed of L-arginine, glycine, and L-aspartic acid. So, we have a (-NH2) group and 2 (-COOH) groups. In almost all the articles I've come crossed, they used carboxylated...
01 February 2016 6,298 2 View
The magnetic nanoparticle had been coated with RGD peptides. How can we track these particles both in the inside & the outside.
31 December 2015 7,310 2 View
RGD specifically binds to the integrin receptors, which makes helps with the nanoparticle-cell conjugate. Even though I am not using any internalisation technique (like electroporation or etc.), I...
11 December 2015 937 4 View
If not, he hats the best way to make it so?
11 December 2015 5,988 2 View
Breast cells are epithelial in origin, however during EMT, the epithelial phenotype (and maybe genotype) is replaced by by the mesenchymal phenotype. This makes me wonder if we have a mesenchymal...
10 November 2015 3,289 7 View
Why do researchers apply different cancer cell lines for their research purposes? I know that the cell lines differ in "invasiveness" potentials, but what does this mean? for example what is the...
10 November 2015 8,306 6 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...
28 July 2024 8,169 0 View
hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...
20 July 2024 647 2 View
Hi all, I am using the element deletion process based on a Tsai-Wu criterion through a UMAT with a specific State Value controlling the process (DepVar -> Variable number controlling element...
17 July 2024 1,501 1 View
I saw a paper(PHAN V-T, ZHANG X, LI Y, et al. Microscale modeling of creep deformation and rupture in Nickel-based superalloy IN 617 at high temperature [J]. Mechanics of Materials, 2017, 114:...
16 July 2024 8,436 0 View
Hello I am trying to simulate repulsive force of two permanent magnets in Abaqus. I have implemented Force equations into a vdload subroutine. sensitive parameters are the center to center...
15 July 2024 3,491 0 View