Do we have any empirical model to model the combined effect of carbonation and chloride attack in concrete concerning climate change?

Do we have any empirical model to model the combined effect of carbonation and chloride attack in concrete concerning time-dependent temperature, relative humidity and concentration of carbon dioxide?

08 February 2021 4,277 1 View

What is the reference value of THD in BLDC MOTOR speed control ?

i used to control EHO+ANFIS to MRPID to Landsman converter for bldc drive i got 7% but some of them are telling IEEE standards are < 5% is it correct for Drives ?

07 February 2021 5,892 1 View

How do I remove tetrabutylammonium perchlorate after electrolysis of organic molecules?

I am doing electrochemical oxidation of organic compounds for the the synthesis of nitrocompounds from simple organic molecules. I want remove supporting electrolyte after electrolysis. Please...

03 January 2021 7,858 2 View

Could not get reduction peak for Mxene Counter electrode in Iodide electrolyte, why?

I have deposited MXene Ti2C2Tx mixed with tritonX binder and heated at 250 C for half an hour in ambient air conditions on FTO glass substrate, the deposition technique followed was doctor...

28 November 2020 2,330 6 View

What are the best binder which can be used for deposition of MXene on FTO?

I would like to coat MXene (Ti3C2Tx) on FTO glass substrate using doctor blade deposition technique, for which i think a binder is essential for the adhesion of MXene onto the FTO. The post...

28 November 2020 9,360 3 View

Kindly suggest the best organic solvents used for dispersibility of graphite powder?

Kindly suggest me some good papers regarding a comparative study on various organic solvents used as dispersion medium for graphite powder. The application is to make a graphite paste and used the...

24 October 2020 1,586 4 View

What are the best used slurry to coat on TCO using doctor blade method?

I'm trying to deposit TiO2 onto FTO beforehand I would also like to have some knowledge on the other different types of slurry consisting of different materials to coat on TCO using doctor blade...

22 October 2020 1,427 1 View

Could anyone please suggest me some papers on using MXenes (Ti3C2Tx) as CE for DSSC application?

I'm currently working on MXenes as Counter electrode (CE) for Dye sensitized solar cell (DSSC) application. I would like to know about the research work being done in this area. Thank you in advance.

14 October 2020 9,448 2 View

Is it possible to coat/mix MXene (Ti3C2Tx) with conductive polymers such as PEDOT or PANI?

Could anyone suggest me some good papers which involves the coating or mixing of MXenes with conductive polymers such as PEDOT or PANI or any other conductive polymer for that matter.

12 October 2020 5,653 3 View

What are the various methods by which MXenes are deposited on the Transparent conducting oxide glass?

I would like to know the different deposition techniques and the respective conditions and constraints to deposit or coat a layer of MXene (Ti3C2Tx) onto a TCO glass substrate.

04 October 2020 4,616 3 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

How climate change will influences human and animal behavioral change?

The role of climate change influencing the human behavior as well as economics interest

01 June 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View