External material addition in COMSOL ?

Parag Patil @Parag_Patil10

05 May 2018 0 4K Report

Hello,

I want to add an external material to the COMSOL for simulation.

How can we do it?

thanks.

Badges
Science topic

More Parag Patil's questions See All

How to vary thickness of surface unevenly in comsol geometry?

I have a tube with a fixed inside thickness. Now, I want to change thickness of some part of this tube to X mm and some part to Y mm. Rest of the part has no change. Moreover, the parts of...

02 March 2019 7,711 3 View

Are oscillations in COMSOL Water-Hammer example die down with respect to time ?

I recently saw an example of water-hammering effect example of COMSOL Multiphysics. The example shows that the sudden closing of a valve produces pressure-shock through out the pipe upstream to...

31 December 2018 1,411 3 View

Shell and tube heat exchanger in comsol is not converging ?

I'm simulating a shell and tube heat exchanger in comsol . I am plugging some of the tubes within the structure to see its effect on del.P and temperature. When I plug 18 of 19 tubes, and one...

09 October 2018 9,825 4 View

Wall lift off in CFD ?

Dear all, I want to know about the wall lift off in CFD simulations What's it's significance and why they are different in FEM and FVM? Moreover, if it only depends on meaning, then why in...

08 September 2018 4,778 0 View

Related to the MATLAB-Livelink functionality ?

I have a doubt: A : 1. If a parameter value (say 'x = 100 ') is changed in model via Matlab-Livelink (via Matlab coding) 2. model is run. After it, B : 1. Again the paramater value is changed...

07 August 2018 6,347 0 View

CFD and Aspen Plus Validation of Heat Exchanger ?

I have simulated a heat-exchanger in COMSOL. The same heat-exchanger is simulated (with the exact geometry ) in Aspen Plus. I'm facing following problems in above: 1. The results of Aspen Plus...

06 July 2018 6,033 0 View

Time Constant for a heat exchanger ?

I have a shell and tube heat exchanger (1-1 pass ). It has shell of 250 mm ID and tubes of 50 mm ID (# 19). Length is 500 mm. I want to know the time-constant for this heat-exchanger (approx....

05 June 2018 1,172 0 View

Using global variable in S-function ?

Dear all, I am trying to connect a function-file in MATLAB to Simulink via 2nd level S-function. But I have a global variable defined in my function file. Can anyone let me know, how to declare...

03 April 2018 1,345 3 View

Connecting COMSOL to Simulink ?

Dear all, I want to use the S-function in Simulink to connect it to COMSOL. I am able to use the Livelink and can import COMSOL model to MATLAB and can access the results. But my problem is as...

03 April 2018 9,674 1 View

Co-Simulating Aspen Plus / Hysys and CFD/COMSOL or FLUENT using CAPE-OPEN?

Dear all, I am trying to co-simulate a chemical process in two-different environment. One is Aspen Plus and another is an CFD based simulator. The process has different units to be simulated in...

02 March 2018 4,485 4 View

Is there any tutorial for comsol general projections?

Hi, im trying to make a projection in a 3d comsol model. I have a non uniforme chanel and my intention is to get the average tempreture in the y-z cross section and se the average tempreture...

02 March 2021 4,624 4 View

Is it possible to do piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch?

How to do Piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch? Piezoelectric coupling between the rectangular substrate and rectangular...

02 March 2021 9,833 3 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

How to use measure capacitance change in COMSOL time dependent study ?

I want to measure change of capacitance due to relative displacement between two parallel plates in COMSOL. Distance between two plates changes with time. So I'm using a time dependent study but...

26 February 2021 8,567 3 View

Error in comsol?

Dear respected researchers, while performing CFD analysis in Comsol it's showing like this Error: Nonlinear solver did not converge. The maximum number of Newton iterations reached can...

24 February 2021 249 3 View

What software programs can directly simulate Additive Manufacturing Directed Energy Deposition (DED)?

I understand there are a lot of software programs that can simulate DED by going through specific modeling, simulation, and commands. For me, that was time consuming and results were not accurate....

24 February 2021 4,428 3 View

How can I find the effect of different parameters like (Reynolds number, Hartman number, volume friction etc.) in COMSOL?

Here I am facing this problem. I don't find any effect of this type of parameters. I am a beginner user of COMSOL.

23 February 2021 9,086 3 View

How to Implement Elastoplasticity in a PCL model in COMSOL Multiphysics?

I am using COMSOL Multiphysics 5.5. I am trying to simulate the tensile test of PCL scaffolds. However, regardless of the strain, I have the elastic region all the time which is not true when it...

23 February 2021 4,050 1 View

Fictitious Boundary Meshing Method (FBM) in Commercial FEA software?

Is it possible to implement FBM in a commercial FEA software package, such as FEMLAB, COMSOL, or open source software like Moose?

22 February 2021 2,968 1 View

How to build fluid structure interaction simulation for elastic ring squeeze film damper in COMSOL?

22 February 2021 5,408 1 View