PACYC PCR not working after several attempts. Would anyone have any suggestions?

So, I have been trying to run a pACYC PCR which will be used later on for a Gibson Assembly. However the PCR is not working. I have already tried gradient PCR and changing extension time; however...

02 March 2021 1,146 2 View

Quantifying leaking DNA from bacteria - what's the secret?

Hi, all! I need to determine if my treatment causes membrane damage in bacteria (S. aureus and E. cloacae), but I cannot use a fluorescent probe such as PI and similar ones because my compound is...

24 February 2021 2,006 2 View

Special issue on PLS-SEM in Mathematics. Are you interested?

21 February 2021 5,601 3 View

Please let me know how to remove mycoplasma contamination from cell line?

I am facing a problem in maintaining the cell line of HepG2 and HepG2.2.15. I have used plasmocin Tm treatment (Invivo gen) Cat.#ant-mpt Lot #MPT-41-01 for more than a month. I have also used...

21 February 2021 6,046 4 View

Western blot protein of interest falling at a lower weight than expected?

My protein of interest is DAGLa (115 kDa). We received the antibody for this from another researcher who reliably shows bands at this weight. We do see a light banding at this weight, but the...

11 February 2021 6,009 3 View

Which Journals would you advise to submit a Letter which briefly talks about neurosurgical treatment of neuro-oncological patient during Sars-COV-2?

Possibily not an open access journal which does not add any publishing costs once being accepted. Thank you in advance

09 February 2021 717 6 View

Sample Size for Quasi-Experimental Quants using one-tailed t-test?

Hi, sorry I'm stumped. I'm going to do a study on the leadership styles (using the MLQ Form 5X) of minority women administrators in medical schools. How will I calculate the sample size? Thank...

30 January 2021 2,865 4 View

Can you do Ponceau staining after loading control for Western Blot?

Hello everyone! I forgot to take a picture of my Ponceau stain prior to starting my first round of primary and secondary antibodies. I'm currently doing my loading control now and was wondering...

25 January 2021 757 3 View

What is the correct way to apply a Design effect for sample size calculation when the sampling method is linear systematic random sampling?

When we are doing sampling by means of simple systematic random sampling,how do we calculate the design effect for use during calculation of sample size for our work?

20 January 2021 5,328 3 View

In opensees is the ReinforcingSteel material sensitive to units of measure?

20 January 2021 7,043 2 View

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

Issues with Permeabilization during Flow Cytometry?

Hello Everyone. Currently I am working to characterize macrophages in the myocardium after ischemia-reperfusion injury in rats. Due to the low total cell number isolated from rat hearts I can...

01 March 2021 3,867 3 View

What do I do with DLS peaks that are from the buffer?

I'm looking at the aggregation of my protein sample using DLS. Unfortunately, my buffer (20mM HEPES) also results in a set of peaks. These are at approximately 1 and 1000 d.nm. The lowest peak...

01 March 2021 9,015 2 View

Precipitate after adding laemmli buffer to protein solution containing Potassium Acetate?

Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...

01 March 2021 2,622 3 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

What information can be had from raman at higher wavenumber?

i have recorded raman spectra of strontium oxide thin film. the spectra were recorded in the range 400 to 4000 cm-1. i have reference to peaks upto 1000cm-1. but i couldn't find literature for...

26 February 2021 2,499 1 View

Can thermal cycler machines be problematic during PCR?

Hi, my question is about the heating of thermal cycler machines and I hope some of you had experienced a similar thing previously. There are two thermal cycler machines in the lab(BioRad) and for...

26 February 2021 4,777 4 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

How can I find a Raman spectrum wavenumber corresponding to what compound?

I have several Raman spectra with very distinct peaks at certain wavenumbers, such as 277, 359, 466, 583, 623, 686, and 795cm-1. How can I identify them to what compound(s)? The RRUFF and others...

24 February 2021 363 3 View