Why daily dexamethasone given to rats fed high fat/fructose/salt cause very high mortality rate?

rats were given daily dexamethasone in drinking water corresponding to 0.5 mg/kg or 2 mg/kg. These rats are simultaneously fed 25% fat, 3% salt in diet and 10% fructose in drinking water but...

15 February 2021 7,634 2 View

Is it possible to do the optimal sizing in the lab?

Dear Colleagues, recently I'm interested in optimal sizing and techno-economic design integrated into micro-grid using artificial intelligence, and I have many inquiries about it: 1- The...

08 December 2020 7,987 3 View

How to carrying out strain modal analysis using AnsysWorkbench?

The displacement mode shapes are determined by running the modal analysis on AnsysWorkbench. How we can have the strain mode shape and the modal strain energy using ansysWorkbench. Example:...

07 December 2020 7,845 3 View

How to resume a Gate (geant4) simulation after a crash or power failure?

Very long simulations may be subject to computer failure for many reasons. Is there a command in Gate to save (or dump) the state of a simulation and be able to resume it later?

04 October 2020 8,133 2 View

How to apply a different material on a group elements of global model?

how to apply a different material on a group elements of global model? i have a wind turbine blade model (complex model) . I want to model a defect on the blade by reduction of young modulus of a...

17 August 2020 1,377 3 View

What do you think about the expulsion of 21 teachers in Jordan university ?

Hello What do you think about the expulsion of 21 teachers in Jordan university because they did not publish any research in the last five years ? Is this an efficacy solution , can we apply it...

22 July 2020 914 34 View

Please suggest a JCR financial mathematics journal names, where to publish an article in a shorter period with very little article processing fee?

It is required to submit an article in good journal

25 May 2020 9,644 7 View

How to draw light lines on dispersion diagram extracted from CST- eigenmode solver?

Hello, I have a non symmetric unit cell with a period over y axis of 48mm. I know that f= c. teta / 2*pi*p having teta in radians. However, I am getting a very weird light lines.

25 May 2020 5,889 3 View

How may the real data be Obtained for verification of Black Scholes equation for two stocks model?

It is required in additional information in the submission of a paper in the journal.

20 May 2020 4,991 1 View

What is the best method for non-linear resolution of the solar/PV cells characteristic ?

Evolutionary Algorithms, namely Genetic Algorithm (GA), Particle Swarms Optimization (PSO) and Differential Evolution (DE) are used to solve optimization problems. As in photovoltaics (PV), the...

05 May 2020 8,708 8 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

How optimize the Size Exclusion Chromatography?

Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...

01 March 2021 2,215 2 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Precipitate after adding laemmli buffer to protein solution containing Potassium Acetate?

Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...

01 March 2021 2,622 3 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View