I am developing platinum electrodes modified by strands of DNA, and I am confused between the acivity of the plane (111) and (100).
Hello Chtaini Abdelilah
I would suggest to read this question below that I asked a few weeks ago. Maybe you could find what you are searching for or find the best person to ask from.
https://www.researchgate.net/post/Considerations_when_moving_from_disk_electrodes_to_screen-printed_or_microfabricated_electrodes
@Martin Peacock is always very helpful on that type of subject.
Best regards,
Marie B.
OK, thank you
What are the temperature and pressure conditions for ethanol dehydration?
30 September 2023 2,657 0 View
Hi all , Please help me fix this warning job msg error in abaqus ""Force equilibrium accepted using the alternate tolerance"" My case of study is an uniaxial tensile test " General static...
29 October 2021 3,489 3 View
I get a fungal culture on a liquid medium (czapeck). When i try to recuperate spores, they couldn't be separated from mycelium.
24 September 2020 7,033 6 View
Dears, please I have a model in smartpls but I'm stacked at the end I couldn't have a good model fit and I wonder what about the SRMR= 0.086 (Saturated model) and SRMR= 0.157 (Estimated Model),...
04 May 2020 3,939 7 View
I conducted experiments of adsorption/desorption of a mixture of compounds on macro porous resin in fixed-bed continuous-flow and I calculated the experimental and the theoretical stoichiometric...
21 April 2020 3,219 5 View
ADN modified electrode.
08 October 2014 5,810 2 View
Fuel cell.
31 August 2014 991 3 View
Thanks.
14 July 2014 4,684 3 View
I intend to analyze the existence of antibiotic in honey
09 July 2014 4,813 5 View
How can we estimate the electrocatalytic activity of phosphate in methanol oxidation?
28 March 2014 4,105 2 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
i am facing the difficulty to find the right and latest topic for my thesis. i searched and read hundreds of articles but i couldn't find the right one. what can i do I'm really confused.
02 August 2024 1,323 8 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View
As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...
24 July 2024 6,930 1 View
I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?
23 July 2024 5,776 2 View
I have attached the charging curve from the battery tester for review. I need help on what is happening
21 July 2024 6,898 2 View