Do i need to drying the sample or not?

10 October 2018 0 5K Report

i need to do folin test for detection the presence of phenolic compound do i need to drying the sample by rotary evaporator then re-dissolving it in the same solvent?

Badges
Science topic

Similar topics
Chemistry
Chemicals
Solvents

More Sondos Almomani's questions See All

What solvent of ethanolamine dissolved in?

i try to prepare 3 %wt of ethnaolamine ? i will take 3 ml of 99% pure 98% ethanolamine ? what solvent used to put 3 ml in it?

01 February 2019 1,611 3 View

What is the refractive index of benzyl alcohol?

what is the refractive index of benzyl alcohol 99%? i will measure the sample through zeta sizer but the solvent did not exit in the library of the machine?

01 February 2019 6,493 4 View

If the plant extract sensitive to temperature and can be degrade ?

i try to synthesis nano particles using green synthesis but the temperature surround 100 C and i notify the color change which indicate the nanopaticles formation but i read in the literature...

01 February 2019 7,203 7 View

What is the wrong in this spectrum ?

i have this spectrum but i think the peaks look wrong??? can any one help to investigate this? plus i should get spectrum on 265 nm ? is this consider near ?

01 February 2019 8,447 1 View

Why their is no change in color?

i try to synthesize platinum nano particles from hexacholoplatinumic acid with plant extract? it should change the color after few minutes from pale yellow to brown ? but with no change in...

31 December 2018 8,535 11 View

What is the kind of surfactant should used ?

Salami doctors i will synthesis platinum nanopartcles using green synthesis but i try to put to of them on each other with no change of color i read in literature that using of surfactant is...

31 December 2018 6,251 6 View

What is better concentration in green synthesis of metallic nanoparticles of plant extract?

i have plant extract and i dried it and get mass in gram after evaporation the solvent, now i want to synthesize metallic nano particles but how much mass in g, mg should dissolve in which solvent...

11 December 2018 6,730 3 View

What is the dilution factor?

salami researcher i dissolve 100 mg of plant extract in 5 ml of distilled water what is the dilution factor? thanks

10 November 2018 8,844 4 View

How can I determine the final concentration of an extract after concentrating by a rotary evaporator?

i will try to drying plant extract using rotary evaporator and i will get weight but to how much i should diluted the sample after drying how i can calculate the dilution factor and what i should...

09 October 2018 6,002 12 View

What is the better solvent to dissolve 1 mg of plant extract have phenolic compound?

i will try to dissolve 1 mg of plant extract have phenolic compounds for Folin test in 10 ml of methanol? but i don't sure if this solvent will dissolve the extract because i used different...

09 October 2018 3,346 4 View

What is the solvent for 8YSZ nano material?

I need to do some experiment with it in liquid form.

07 August 2024 613 3 View

Which solvent is better to dissolve with secondary metabolites extracted from fungi?

I work on MCF7 cell cell for anticaner purpose and I wa to do drug preperation the drug ( secondary metabolites extracted from Aspergillus) My question which solvent is better with these secodary...

03 August 2024 4,725 2 View

I need to dissolve stigmasterol for an animal experiment, it hasn't dissolved in either DMSO or vegetable oil. Can anyone recommend the best solvent?

Hello everyone, I need to dissolve stigmasterol for an animal experiment, but it hasn't dissolved in either DMSO or vegetable oil. Can anyone recommend the best solvent for stigmasterol?

01 August 2024 7,504 2 View

For the moringa oleifera extract using ethanol as the solvent,what is the alternative method to concentrate the extract other than rotary evaporation?

99% pure ethanol was used for maceration also alternate methods along with the temperature and time to concentrate the extract can be specified

31 July 2024 5,113 4 View

Is the black sediment consider as sand? If not, how can I filter it out?

Hi researchers! I'm working on soil texture analysis, and the end result for sand is doubtful because there is black sediment appearing after drying, as shown in the figure. Is it considered sand?...

30 July 2024 557 2 View

Where to start the Analytical model for Dry sliding wear of metal surface ?

I am doing research on wear mechanism of the additive manufactured metal parts under dry condition. Please share the reference to start the analytical modelling of the wear prediction.

29 July 2024 6,115 0 View

Why methanol and sulphuric acid used in the analysis of polyhydroxyalkanoates (PHA) by GC-MS?

Why methanol and sulphuric acid, used in the analysis of polyhydroxyalkanoates (PHA) methyl esters by GC-MS? Additionally, why do we typically use non-polar solvents in GC-MS?

22 July 2024 1,210 2 View

When making abraxane with Nab tech, why is 9:1 Chloroform&EtOH used as solvents?

Is it the best optimization ratio based on experiments?

22 July 2024 8,170 0 View

What is the solvent system required to run tlc for calixarenes?

If you don't understand my question let me know

21 July 2024 563 1 View

Convergence of absorbency values to determine the total phenolic content of several solvents?

I used several solvents and measured the absorbency and determined the total phenolic content, but the results were similar after dropping them on the titration curve; What is the reason, please help

17 July 2024 5,151 5 View